Muzzys DRL Adapter for 2010-2013 Chevrolet Camaro DRL + Headlights + Halos Harness Plug and Play Adapter Kit, Gain Control of Your Daytime Running (Fog) Lights!
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Will Fit All 2010-2013 CAMARO\'S With Daytime Running Lights (Does NOT work for 2012-2013 ZL1)Plug and Play Harness. Simple 5 minute install. See below for install directions.This will allow your Camaro\'s day time running lights to function at night while your headlights are on.Only ONE adapter is required per vehicle. The ONE adapter will control both sides.Works with LED lights as well.
상품설명
This daytime running light (DRL) harness allows your daytime running lights to be on when your headlights are on. This Will Fit ALL 2010-2013 CAMARO\'S With RS package(Does not work for 2012-2013 ZL1) Installation: 1- Turn the wheels all the way to left to gain access to the screws on the passenger side fender well liner 2- Remove the 3 (T20) torx screws holding the fender liner to the bumper. ZL1 owners also remove the 3 screws under the bumper. This will allow you access to the forward lamp harness connector 3- Locate the forward lamp harness and disconnect 4- Plug our harness inline 5- Reconnect the other end of the harness to our harness 6- Verify operation. With headlamps on your DRL\'s should also be on 7- Reinstall fender liner screws. Package: 1 x DRL Harness
Will Fit All 2010-2013 CAMARO\'S With Daytime Running Lights (Does NOT work for 2012-2013 ZL1)Plug and Play Harness. Simple 5 minute install. See below for install directions.This will allow your Camaro\'s day time running lights to function at night while your headlights are on.Only ONE adapter is required per vehicle. The ONE adapter will control both sides.Works with LED lights as well.
상품설명
This daytime running light (DRL) harness allows your daytime running lights to be on when your headlights are on. This Will Fit ALL 2010-2013 CAMARO\'S With RS package(Does not work for 2012-2013 ZL1) Installation: 1- Turn the wheels all the way to left to gain access to the screws on the passenger side fender well liner 2- Remove the 3 (T20) torx screws holding the fender liner to the bumper. ZL1 owners also remove the 3 screws under the bumper. This will allow you access to the forward lamp harness connector 3- Locate the forward lamp harness and disconnect 4- Plug our harness inline 5- Reconnect the other end of the harness to our harness 6- Verify operation. With headlamps on your DRL\'s should also be on 7- Reinstall fender liner screws. Package: 1 x DRL Harness
2019-07-02 12:03:06
