N1201SA UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester 140MHz - 2.7GHz(English Version)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration.The default boot into single-point measurement interface. Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.Startup and shutdown Hold down the CTRL key off press the power switch button.The boot state, long press (2S above) the switch button, after the release, the instrument will shut down The boot state, long press (2S above) the switch button, after the release, the instrument will shut down.Press the second button and power button at the same to power on .
상품설명
Specifications: working currency 140MHz~2700MHz stepped frequency 1kHz Display 2.4cun TFT trdp resolution ratio 320*240(QVGA) 2000mAH(7.4Wh) power consumption <1.5W charge current 400mA charge port USB Auto power off can be set 5-60minutes measured parameters resistence reactance standing wave s11 resolution ratio 4 number frequency accuracy about 5ppm Connector SMA-K measurement range: impedance:0.1~1000 standing wave:1.000~65 s11(dB):0dB~-60dB Remark: Press the second button and power button at the same to power on .
Make sure this fits by entering your model number.This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration.The default boot into single-point measurement interface. Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.Startup and shutdown Hold down the CTRL key off press the power switch button.The boot state, long press (2S above) the switch button, after the release, the instrument will shut down The boot state, long press (2S above) the switch button, after the release, the instrument will shut down.Press the second button and power button at the same to power on .
상품설명
Specifications: working currency 140MHz~2700MHz stepped frequency 1kHz Display 2.4cun TFT trdp resolution ratio 320*240(QVGA) 2000mAH(7.4Wh) power consumption <1.5W charge current 400mA charge port USB Auto power off can be set 5-60minutes measured parameters resistence reactance standing wave s11 resolution ratio 4 number frequency accuracy about 5ppm Connector SMA-K measurement range: impedance:0.1~1000 standing wave:1.000~65 s11(dB):0dB~-60dB Remark: Press the second button and power button at the same to power on .
2019-04-02 14:42:23
