Yonico 15231 1/4-Inch Plywood 2 Bit Plywood Tongue and Groove Router Bit Set 1/2-Inch Shank
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.5.2mm Tongue and Groove for 1/4" Plywood center panel.Create tongue and groove door frames for 1/4" thick plywood center panelsPremium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edgeFor use on table mount router onlySilver induction brazing for maximum strength and durability
상품설명
Style:1/2" Shank This unique tongue and groove Router bit set cuts a slot 5.2mm thick which is perfect for making tongue and groove doors with a 1/4" plywood center panel. The actual thickness of 1/4" plywood is thinner than the stated thickness because of the dressing of the board. These router bits are designed specifically for use with 1/4" plywood to create shaker cabinet door with a plywood center panel. A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and tabletops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. For best results, use with solid wood only.
Make sure this fits by entering your model number.5.2mm Tongue and Groove for 1/4" Plywood center panel.Create tongue and groove door frames for 1/4" thick plywood center panelsPremium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edgeFor use on table mount router onlySilver induction brazing for maximum strength and durability
상품설명
Style:1/2" Shank This unique tongue and groove Router bit set cuts a slot 5.2mm thick which is perfect for making tongue and groove doors with a 1/4" plywood center panel. The actual thickness of 1/4" plywood is thinner than the stated thickness because of the dressing of the board. These router bits are designed specifically for use with 1/4" plywood to create shaker cabinet door with a plywood center panel. A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and tabletops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. For best results, use with solid wood only.
2019-04-06 16:22:46