Coupler Hitch Attachments for Instep and Schwinn Bike Trailers, Flat and Angled Couplers for a Wide Range of Bicycle Carriers, Trailer Sizes, Models, and Styles
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Coupler attaches an InStep or Schwinn trailer made after 11/2/16 to a bicycleComes with lock washer, coupler plate, and locking pinCompatible with Schwinn and InStep brand TrailersTrailers made before 11/2/2016 will use coupler part number 25-SA074A
상품설명
This is the part needed to connect a Schwinn or InStep trailer to your bike. It is called a coupler, but it acts like a trailer hitch for your bicycle. It allows a trailer to be connected and reconnected on a daily basis without tools. All trailers usually come with the coupler that works with that trailer, but it can be helpful to have an extra installed on additional adult bikes, so different riders can take turns pulling. The installation requires the removal of the nut that bolts on the rear wheel. Once it is on you will be able to hitch and unhitch the bike before or after a ride easily. Comes with three parts; coupler plate, lock washer and a locking pin. The 25-SAO75 model coupler fits Schwinn and Instep trailers manufactured after October 25, 2016 (AF). If your trailer was made before, 10/25/16 look for part number 25-SA074A to be compatible with your trailer. If you are not sure of the date of manufacture of the trailer, look for a date code on the tow bar of the trailer usually on a sticker. Look for a #2 stamped in the metal of the tow bar to confirm that it was made after 10/25/16.
Coupler attaches an InStep or Schwinn trailer made after 11/2/16 to a bicycleComes with lock washer, coupler plate, and locking pinCompatible with Schwinn and InStep brand TrailersTrailers made before 11/2/2016 will use coupler part number 25-SA074A
상품설명
This is the part needed to connect a Schwinn or InStep trailer to your bike. It is called a coupler, but it acts like a trailer hitch for your bicycle. It allows a trailer to be connected and reconnected on a daily basis without tools. All trailers usually come with the coupler that works with that trailer, but it can be helpful to have an extra installed on additional adult bikes, so different riders can take turns pulling. The installation requires the removal of the nut that bolts on the rear wheel. Once it is on you will be able to hitch and unhitch the bike before or after a ride easily. Comes with three parts; coupler plate, lock washer and a locking pin. The 25-SAO75 model coupler fits Schwinn and Instep trailers manufactured after October 25, 2016 (AF). If your trailer was made before, 10/25/16 look for part number 25-SA074A to be compatible with your trailer. If you are not sure of the date of manufacture of the trailer, look for a date code on the tow bar of the trailer usually on a sticker. Look for a #2 stamped in the metal of the tow bar to confirm that it was made after 10/25/16.
2020-05-18 19:49:56