해외구매대행 N0.1 쇼핑365
Astromania Premium Dovetail Clamp for Telescopes and Cameras

상품번호 B072BRSB86
상품상태 New    
상품구분 Electronics / Camera & Photo
브랜드 Visit the Astromania Store
판매자 Amazon
판매자위치 미확인
SNS공유

상품가격 가격문의
상품가격 상세보기
이벤트보기





상품특징
Make sure this fits by entering your model number.With the Astromania dovetail clamp, you can attach your telescope to mount - especially suited for heavy telescopes.Clamps all GP level bars safely and reliable. Especially high load capacity up to approx. 20 kg.Areal clamping with two clamping screws - protects the accessories and provides a very stable connection.Dimensions: 87 mm x 87 mm - approx. 116 mm with screw. 9 bores allow connecting to almost all surfaces.Extremly flexible through 9 countersunk bores: M6 Bores: Four M6 bores at 38 mm distance square, two M6 bores lengthwise. One M6 bore in the middle with two drilled (but not threaded) to accommodate screws up to 6mm in diameter, center-to-center screw hole spacing is from 35 to 63mm.
상품설명
With the quick coupling, you can attach your telescope or camera safely. The clamp is especially suited for building double connections where a high load capacity is needed. Through the areal clamping and two clamping screws, a high clamping power can be achieved, while your accessories are protected against unaesthetic pressure marks. A safe and precise clamping of your telescope: Whether you want to clamp a telescope from Vixen, Skywatcher, Orion..., you simply attach a GP level dovetail bar to the telescope. With most telescopes, this bar is already included. The bar is simply clamped with the pressure screws and fixed. You can also shift the telescope in the clamp for achieving an even better equilibrium. Additionally, the length of the dovetail clamp prevents vibrations. The wall thickness is constructe for highest loads. At the thinnest point, the clamp is 15 mm thick! The clamp itself can be adapted to a mount, to the counterweight shaft or another dovetail bar, building a double connection. Extremly flexible through 9 countersunk bores: For attaching the clamp, 9 bores are available for M6 and 1/4" screws. All functions, especially the clamping, are completely kept. The clamping screw can be used without problems. Technical Details: Suitable for: GP level dovetail bars. Dimensions: 87 mm x 87 mm (116 mm with screw). Load capacity: approx. 20 kg. M6 Bores: Four M6 bores at 38 mm distance square, two M6 bores lengthwise. One M6 bore in the middle with two drilled (but not threaded) to accommodate screws up to 6mm in diameter, center-to-center screw hole spacing is from 35 to 63mm.




























2021-12-26 23:12:37


회사소개 | 공지사항 | 개인정보처리방침 | 이용약관 | 찾아오시는길
BANK INFO
입금계좌 : 273001-04-063141
국민은행   예금주: (주)카고맥스
CUSTOMER CENTER
고객센터 : 031-698-2301
상담가능시간 : 월요일 ~ 금요일 10:00 ~ 17:00
점심시간 : 12:00 ~ 13:00 / 토,일,공휴일 휴무
법인명 : (주)카고맥스 | 대표이사 : 허승철
사업자등록번호 : 501-87-00144 | 특별통관대상지정번호 : 20050101
통신판매업신고번호 : 2015-경기성남-1454호 | 팩스 : 031-698-2302
개인정보관리책임자 : 최정원 | 대표이메일 : cargomax2015@gmail.com
주소 : 서울시 금천구 가산동 371-17 비와이씨하이시티 C동 1605 나호 (주)카고맥스
COPYRIGHT © CARGOMAX. ALL RIGHT RESERVED.
쇼핑365는 관세법등 관련규정을 준수하고, 불법물품을 취급하지 아니하며, 분할배송등에 의한 가격 허위신고등 구매자의 불법사항 요청등에 일체 협조하지 않습니다. 또한, 쇼핑365는 해외구매, 해외경매, 배송대행등 상품의 구매 및 입찰, 배송을 대행 중계하는 서비스를 제공하며, 상품 및 상품의 내용, 해외판매처의 상품등록에 대해서는 일체의 책임을 지지 않습니다.