STM32 Nucleo development board with STM32L452RE MCU NUCLEO-L452RE
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.STM32L452RE MCU Ultra-low-power with FPU ARM Cortex-M4 MCU 80 MHz with 512 kbytes Flash, USB Device, DFSDMOn-board ST-LINK/V2-1 debugger/programmer with SWD connectorCan be powered from USBThree LEDs, Two Push-buttonsSupport of wide choice of Integrated Development Environments (IDEs) including IAR, ARM Keil, GCC-based IDEs
상품설명
The STM32 Nucleo board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The ArduinoUno V3 connectivity support and the ST morpho headers allow to expand easily the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger and programmer. The STM32 Nucleo board comes with the STM32 comprehensive software HAL library together with various packaged software examples, as well as direct access to the ARMmbedonline resources at http://mbed.org. Key Features STM32 microcontroller in QFP64 package Two types of extension resources: Arduino Uno V3 connectivity and ST morpho extension pin headers for full access to all STM32 I/Os ARM mbed (see http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: Selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Flexible board power supply: USB VBUS or external source(3.3V, 5V, 7 - 12V), Power management access point Three LEDs: USB communication (LD1), user LED (LD2), power LED (LD3) Two push-buttons: USER and RESET USB re-enumeration capability. Three different interfaces supported on USB: Virtual COM port, Mass storage, Debug port Support of wide choice of Integrated Development Environments (IDEs) including IAR, ARM Keil, GCC-based IDEs
Make sure this fits by entering your model number.STM32L452RE MCU Ultra-low-power with FPU ARM Cortex-M4 MCU 80 MHz with 512 kbytes Flash, USB Device, DFSDMOn-board ST-LINK/V2-1 debugger/programmer with SWD connectorCan be powered from USBThree LEDs, Two Push-buttonsSupport of wide choice of Integrated Development Environments (IDEs) including IAR, ARM Keil, GCC-based IDEs
상품설명
The STM32 Nucleo board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The ArduinoUno V3 connectivity support and the ST morpho headers allow to expand easily the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger and programmer. The STM32 Nucleo board comes with the STM32 comprehensive software HAL library together with various packaged software examples, as well as direct access to the ARMmbedonline resources at http://mbed.org. Key Features STM32 microcontroller in QFP64 package Two types of extension resources: Arduino Uno V3 connectivity and ST morpho extension pin headers for full access to all STM32 I/Os ARM mbed (see http://mbed.org) On-board ST-LINK/V2-1 debugger/programmer with SWD connector: Selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Flexible board power supply: USB VBUS or external source(3.3V, 5V, 7 - 12V), Power management access point Three LEDs: USB communication (LD1), user LED (LD2), power LED (LD3) Two push-buttons: USER and RESET USB re-enumeration capability. Three different interfaces supported on USB: Virtual COM port, Mass storage, Debug port Support of wide choice of Integrated Development Environments (IDEs) including IAR, ARM Keil, GCC-based IDEs
2020-06-25 16:42:15
