TCS Bore Cleaning Paste (10ml) - TCS
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Step 2 of the TCS Cleaning ProcessFast & Effective and Safer than other SolventsInclude convenient wood spatula
상품설명
TCS Manufacturing Bore Cleaning Paste is a micrometer ground garnet in a gray paste. Faster, easier to use and safer than solvents, this paste is non-embedding, nearly odorless, and comes in an easy to use syringe. With TCS bore paste you no longer need foul smelling solvents or expensive wire brushes. Just put a dab of this product on a patch and spread it around with the included wooden spatula. Then use one of our TCS cleaning jags to press the patch into the barrel. Use a slight scrubbing motion and feel how well this combination cleans. When the patch comes out of the barrel, the bore paste will be darker where it made contact with the barrel. You will probably see dirt, copper and lead on the patch, depending on what was in your barrel. You will know this bore cleaner cleaned your barrel, because “The proof is on the patch.” After using the bore paste, visually inspect the barrel and see if you need to reapply. Remember the Bore Cleaning Paste darkens when used. Once the barrel looks clean, put some TCS Tactical Cleaning Solvent on a clean patch and use it to remove the bore paste around the outside of the breech area. Then use another patch with a few drops of TCS Tactical Cleaning Solvent on it to remove the Bore Cleaning Paste residue from the barrel. If you are going to store the gun for any length of time, you can leave the oil in the barrel to protect against corrosion. If you are going to shoot the gun use a degreaser applied to a patch to remove the oil.
Make sure this fits by entering your model number.Step 2 of the TCS Cleaning ProcessFast & Effective and Safer than other SolventsInclude convenient wood spatula
상품설명
TCS Manufacturing Bore Cleaning Paste is a micrometer ground garnet in a gray paste. Faster, easier to use and safer than solvents, this paste is non-embedding, nearly odorless, and comes in an easy to use syringe. With TCS bore paste you no longer need foul smelling solvents or expensive wire brushes. Just put a dab of this product on a patch and spread it around with the included wooden spatula. Then use one of our TCS cleaning jags to press the patch into the barrel. Use a slight scrubbing motion and feel how well this combination cleans. When the patch comes out of the barrel, the bore paste will be darker where it made contact with the barrel. You will probably see dirt, copper and lead on the patch, depending on what was in your barrel. You will know this bore cleaner cleaned your barrel, because “The proof is on the patch.” After using the bore paste, visually inspect the barrel and see if you need to reapply. Remember the Bore Cleaning Paste darkens when used. Once the barrel looks clean, put some TCS Tactical Cleaning Solvent on a clean patch and use it to remove the bore paste around the outside of the breech area. Then use another patch with a few drops of TCS Tactical Cleaning Solvent on it to remove the Bore Cleaning Paste residue from the barrel. If you are going to store the gun for any length of time, you can leave the oil in the barrel to protect against corrosion. If you are going to shoot the gun use a degreaser applied to a patch to remove the oil.
2019-04-04 11:50:48