YONICO Router Bits Tongue & Groove Set 1/4-Inch Plywood Panel 2 Bit 1/4-Inch Shank 15231q
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
This tongue and groove router bit set cuts a slot 5.2mm thick which is perfect for making tongue and groove doors with a 1/4" plywood center panel.Create tongue and groove door frames for 1/4" thick plywood center panelsPremium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edgeFor use on table mount router onlySilver induction brazing for maximum strength and durability
상품설명
This unique tongue and groove Router bit set cuts a slot 5.2mm thick which is perfect for making tongue and groove doors with a 1/4" plywood centre panel. The actual thickness of 1/4" plywood is thinner than the stated thickness because of the dressing of the board. These router bits are designed specifically for use with 1/4" plywood to create shaker cabinet door with a plywood centre panel. 1/4" shank. A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and table tops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. For best results, use with solid wood only.
This tongue and groove router bit set cuts a slot 5.2mm thick which is perfect for making tongue and groove doors with a 1/4" plywood center panel.Create tongue and groove door frames for 1/4" thick plywood center panelsPremium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edgeFor use on table mount router onlySilver induction brazing for maximum strength and durability
상품설명
This unique tongue and groove Router bit set cuts a slot 5.2mm thick which is perfect for making tongue and groove doors with a 1/4" plywood centre panel. The actual thickness of 1/4" plywood is thinner than the stated thickness because of the dressing of the board. These router bits are designed specifically for use with 1/4" plywood to create shaker cabinet door with a plywood centre panel. 1/4" shank. A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and table tops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. For best results, use with solid wood only.
2019-03-27 15:53:29