BusBar – 12-Point Power Distribution Block – #8 Terminal Screws & 1/4” Stud – Red
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Available in 4 sizes, all with covers. Made in the USA of nickel plated brass bars, stainless steel hardware, and glass-filled nylon for strong, corrosion-free service.4-post models available in 5/16" or 3/8" posts, with 3 additional #8 screws for small attachments. Rated at 250 amps at 12VDC, maximum 48VDC.10-point terminal strips have #8 screws and two 1/4" post for the primary connection, protected by a durable cover with retainers. Rated at 150 Amps at 12VDC (15 Amps per connection), maximum 48VDC.12-point terminal strips have #8 screws and a single 1/4" post for the primary connection, protected by a durable rubber cap. Rated at 180 Amps at 12VDC (15 Amps per connection), maximum 48VDC.Dual-post models have two separate bars separated by a full-lengh divider to handle both positive and negative connections on a compact footprint. Available with 5/16" or 3/8" posts. Rated at 250 amps per bar at 12VDC, maximum 48VDC.
상품설명
All models feature: Made in the USA Available in black or red (except dual row models) Nickel plated brass contact plate for low resistance and protection against corrosion Stainless steel screws, hex nuts, and washers Base material is glass-filled nylon When used with appropriate insulators and shrink tube, meets USCG 33 CFR Subpart I, SAE J2120 8.5 & ABYC E-9.4 H. 4-post models feature: Available with 5/16" or 3/8" posts Max amperage: 250 Amps at 12VDC Max voltage: 48VDC 3 additional #8-32 screws for small connections Mounting screws: #10 (not included) Mounting center: 5.7 inch Dimensions (with cover): 6.6 x 1.4 x 2.0 inch (168 x 35 x 50 mm) 10-point models feature: 10 x #8-32 stainless steel screws 2 x 1/4” stainless steel terminal post Max Continuous Amperage: 150 amps at 12VDC - 15 Amps per connection at 12VDC Max Intermittent Amperage: 20 Amps per connection (less than 1 minute) Max Voltage: 48VDC Mounting screws: #10 (not included) Dimensions (with covers): 7.2 x 1.9 x 1.7 inch (182 x 48 x 43 mm) Includes large cover with retainers 12-point models feature: 12 x #8-32 stainless steel screws 1 x 1/4" stainless steel terminal post Max Continuous Amperage: 180 Amps at 12VDC – 15 Amps per connection at 12VDC Max Intermittent Amperage: 20 Amps per connection (less than 1 minute) Max Voltage: 48VDC Mounting screws: #10 (not included) Dimensions (with cover): 5.5 x 1.4 x 1.2 inch (140 x 35 x 30 mm) Includes terminal insulator for large stud and cover for screws Dual-bus models feature: Similar to 4-post models, with two bars on one base Bars available with combinations of 5/16" or 3/8" posts Center divider to separate positive and negative connections Mounting center: 5.7 inch Dimensions (with cover): 5.75 x 2 x 3.25 inch (146 x 50 x 82 mm)
Available in 4 sizes, all with covers. Made in the USA of nickel plated brass bars, stainless steel hardware, and glass-filled nylon for strong, corrosion-free service.4-post models available in 5/16" or 3/8" posts, with 3 additional #8 screws for small attachments. Rated at 250 amps at 12VDC, maximum 48VDC.10-point terminal strips have #8 screws and two 1/4" post for the primary connection, protected by a durable cover with retainers. Rated at 150 Amps at 12VDC (15 Amps per connection), maximum 48VDC.12-point terminal strips have #8 screws and a single 1/4" post for the primary connection, protected by a durable rubber cap. Rated at 180 Amps at 12VDC (15 Amps per connection), maximum 48VDC.Dual-post models have two separate bars separated by a full-lengh divider to handle both positive and negative connections on a compact footprint. Available with 5/16" or 3/8" posts. Rated at 250 amps per bar at 12VDC, maximum 48VDC.
상품설명
All models feature: Made in the USA Available in black or red (except dual row models) Nickel plated brass contact plate for low resistance and protection against corrosion Stainless steel screws, hex nuts, and washers Base material is glass-filled nylon When used with appropriate insulators and shrink tube, meets USCG 33 CFR Subpart I, SAE J2120 8.5 & ABYC E-9.4 H. 4-post models feature: Available with 5/16" or 3/8" posts Max amperage: 250 Amps at 12VDC Max voltage: 48VDC 3 additional #8-32 screws for small connections Mounting screws: #10 (not included) Mounting center: 5.7 inch Dimensions (with cover): 6.6 x 1.4 x 2.0 inch (168 x 35 x 50 mm) 10-point models feature: 10 x #8-32 stainless steel screws 2 x 1/4” stainless steel terminal post Max Continuous Amperage: 150 amps at 12VDC - 15 Amps per connection at 12VDC Max Intermittent Amperage: 20 Amps per connection (less than 1 minute) Max Voltage: 48VDC Mounting screws: #10 (not included) Dimensions (with covers): 7.2 x 1.9 x 1.7 inch (182 x 48 x 43 mm) Includes large cover with retainers 12-point models feature: 12 x #8-32 stainless steel screws 1 x 1/4" stainless steel terminal post Max Continuous Amperage: 180 Amps at 12VDC – 15 Amps per connection at 12VDC Max Intermittent Amperage: 20 Amps per connection (less than 1 minute) Max Voltage: 48VDC Mounting screws: #10 (not included) Dimensions (with cover): 5.5 x 1.4 x 1.2 inch (140 x 35 x 30 mm) Includes terminal insulator for large stud and cover for screws Dual-bus models feature: Similar to 4-post models, with two bars on one base Bars available with combinations of 5/16" or 3/8" posts Center divider to separate positive and negative connections Mounting center: 5.7 inch Dimensions (with cover): 5.75 x 2 x 3.25 inch (146 x 50 x 82 mm)
2019-04-02 09:44:10
