JINGLING 6mm 1/4" inch Diamond Hole Saw Core Drill Bit Coated Masonry Drilling Cutter Glass Marble Tile Granite Pack of 20Pcs
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Hole/Outer Diameter: 6mm (close to 1/4"); Inner Diameter: 4mm (5/32"); Drill depth: 20mm (3/4")The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or graniteUse with water as a lubricant, holes require No futher work as cutting is cleanNOT have center pilot drill;Start drill at 45 degree to surface and align to 90 degree as hole formsProduct Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile
상품설명
JINGLING 6mm 1/4" inch Diamond Hole Saw Core Drill Bit Coated Masonry Drilling Cutter Glass Marble Tile Granite Pack of 20Pcs Product Name: diamond tip drill bit , glass hole saw bit , glass drill bit The 6mm 1/4 inches diamond coated hole saw suitable for use in drill hole on glass, tile, marble or granite Hole/Outer Diameter : 6mm (close to 1/4") Inner Diameter : 4mm (5/32") Total length : 51mm (2") Drill depth: 20mm (3/4") Shank diameter: 5.3mm (0.21") Quantity: 20Pcs Drilling speed: Drill a hole in seconds Use with water as a lubricant Type: Core drill bit NOT have center pilot drill, it will fit handheld or upright drillers Quick Tips 1. Please add water for coolant and drill slowly 2. Start drill at 45 Degree to surface and align to 90 Degree as hole forms 3. Never use drills while machine is in hammer action. 4. Holes require No futher work as cutting is clean We can list any size & amount of this product: Hole diameter from 1mm to 230mm We will send out your order within 1-2 days after payment has been received and cleared How to use a hand drill to drill holes in the glass/tile/stone? Step 1. The bit on the glass/tile/stone 45 degree, open a half-moon notch on it Step 2. Slowly up the bit to 60 degrees, and then gently drill Step 3. Reached 90 degrees, continue to drill Step 4. Drill through the glass/tile/stone finally, the technique requires a "wobble" of the drill rather that steady pressure straight on
Hole/Outer Diameter: 6mm (close to 1/4"); Inner Diameter: 4mm (5/32"); Drill depth: 20mm (3/4")The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or graniteUse with water as a lubricant, holes require No futher work as cutting is cleanNOT have center pilot drill;Start drill at 45 degree to surface and align to 90 degree as hole formsProduct Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile
상품설명
JINGLING 6mm 1/4" inch Diamond Hole Saw Core Drill Bit Coated Masonry Drilling Cutter Glass Marble Tile Granite Pack of 20Pcs Product Name: diamond tip drill bit , glass hole saw bit , glass drill bit The 6mm 1/4 inches diamond coated hole saw suitable for use in drill hole on glass, tile, marble or granite Hole/Outer Diameter : 6mm (close to 1/4") Inner Diameter : 4mm (5/32") Total length : 51mm (2") Drill depth: 20mm (3/4") Shank diameter: 5.3mm (0.21") Quantity: 20Pcs Drilling speed: Drill a hole in seconds Use with water as a lubricant Type: Core drill bit NOT have center pilot drill, it will fit handheld or upright drillers Quick Tips 1. Please add water for coolant and drill slowly 2. Start drill at 45 Degree to surface and align to 90 Degree as hole forms 3. Never use drills while machine is in hammer action. 4. Holes require No futher work as cutting is clean We can list any size & amount of this product: Hole diameter from 1mm to 230mm We will send out your order within 1-2 days after payment has been received and cleared How to use a hand drill to drill holes in the glass/tile/stone? Step 1. The bit on the glass/tile/stone 45 degree, open a half-moon notch on it Step 2. Slowly up the bit to 60 degrees, and then gently drill Step 3. Reached 90 degrees, continue to drill Step 4. Drill through the glass/tile/stone finally, the technique requires a "wobble" of the drill rather that steady pressure straight on
2019-05-29 01:54:51