Elimia 7.5 HP 3 PH Motor Starter, 208 - 230V 3 Phase, Nema 1, UL Listed, 17-25 Amp Overload
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품설명
New Model! Low cost UL listed model ALMS. Available up to 10 HP 230V 3 phase and 5 HP 230V 1 phase. Also available in 480V and 600V models with coil voltages of 24VAC and 120V. High quality, easy to install IEC motor starter. UL 508A Listed. This Motor Starter is a complete unit ready to be installed. Nothing to add. It uses momentary push button switches integrated in the enclosure. Momentary activation uses wiring through the auxiliary contact on the starter to "latch" the starter on until the stop button is pressed or the overload trips. Momentary controls are not meant to be used with machines requiring limit switch controls such as pumps running from limit switch "on-off" commands. The enclosure has a steel stamped base and polymer cover and is rated Nema type 1. Every Motor Starter is assembled and tested to order in Alabama, USA. Our customer's come back time and time again, try one and you will see... Nothing else in this price range even comes close. Please call us if you have any questions. We want you to get the right equipment - 1-855-4Elimia. We offer an extensive line of standard motor starters as well as custom built units. Combination starters and reversing starters are also available in standard and custom configurations. Model Number: ALMS 17-25-230 Model Explanation: ALMS = Latching Start/Stop push button 17-25 = Overload Size 230 = Coil Voltage (works from 196V to 250V, Good for 208V power) Sized for 7.5 HP @ 208-230V 3 phase motor NOTE: pictures may be of another model with the same size specs. Item you will receive is detailed in the above specifications.
New Model! Low cost UL listed model ALMS. Available up to 10 HP 230V 3 phase and 5 HP 230V 1 phase. Also available in 480V and 600V models with coil voltages of 24VAC and 120V. High quality, easy to install IEC motor starter. UL 508A Listed. This Motor Starter is a complete unit ready to be installed. Nothing to add. It uses momentary push button switches integrated in the enclosure. Momentary activation uses wiring through the auxiliary contact on the starter to "latch" the starter on until the stop button is pressed or the overload trips. Momentary controls are not meant to be used with machines requiring limit switch controls such as pumps running from limit switch "on-off" commands. The enclosure has a steel stamped base and polymer cover and is rated Nema type 1. Every Motor Starter is assembled and tested to order in Alabama, USA. Our customer's come back time and time again, try one and you will see... Nothing else in this price range even comes close. Please call us if you have any questions. We want you to get the right equipment - 1-855-4Elimia. We offer an extensive line of standard motor starters as well as custom built units. Combination starters and reversing starters are also available in standard and custom configurations. Model Number: ALMS 17-25-230 Model Explanation: ALMS = Latching Start/Stop push button 17-25 = Overload Size 230 = Coil Voltage (works from 196V to 250V, Good for 208V power) Sized for 7.5 HP @ 208-230V 3 phase motor NOTE: pictures may be of another model with the same size specs. Item you will receive is detailed in the above specifications.
2019-05-19 03:42:11