Cambridge Audio Alva Solo | Phono Preamp for Moving Magnet Turntable
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
✓ DESIGNED FOR VINYL – Cambridge Audio’s Alva Solo is a dedicated moving magnet phono preamp designed to give you a superb sonic experience from your favorite record collection using its switch mode power supply and surface mounted circuit board.✓ ATTENTION TO DETAIL – The Alva Duo\'s switch mode power supply and surface mount technology delivers short signal paths and a faster response with precision and lower background noise so you don\'t hear a hum over the vinyl\'s low-level signals.✓ SUBSONIC FILTER & BALANCE CONTROL – The Alva Solo will even work if your vinyls are a little worse for wear. The subsonic filter and balance control eliminate low frequency rumbles from imperfections in your vinyl for an accurate soundstage.✓ GREAT ADDITION TO ANY AMP – The Alva Solo is a perfect for your amp that doesn’t have a phono preamp built in or a great upgrade for your amp with one built in. You will notice more smoothness and warmth with less distortion and background noise.✓ TECH SPECS - MAX POWER CONSUMPTION 10W, GAIN @ 1KHZ 39dB, NOMINAL OUTPUT 300mV, SENSITIVITY FOR NOMINAL OUTPUT 3.35mV, EQUIVALENT INPUT NOISE ~0.09uV, RIAA CURVE ACCURACY +/- 0.65dB 30Hz-20kHz, DIMENSIONS (H X W X D) 1.9x6.9x5.2”, WEIGHT 1.5lbs
상품설명
Enjoy every last detail from your vinyl collection with our highest quality moving magnet phono stage, the Solo Phono Preamplifier. TECH SPECS MAX POWER CONSUMPTION 10W GAIN @ 1KHZ 39dB NOMINAL OUTPUT 300mV SENSITIVITY FOR NOMINAL OUTPUT 3.35mV EQUIVALENT INPUT NOISE (A-WEIGHTED) ~0.09uV RIAA CURVE ACCURACY +/- 0.65dB 30Hz-20kHz SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW) >90dB THD+N 1KHZ (20-20KHZ BW) <0.0025% INPUT IMPEDANCE 47k Ohm INPUT CAPACITANCE 100pF OVERLOAD MARGIN >30dB CROSSTALK @10KHZ >85dB DIMENSIONS (H X W X D) 48x176x132 (1.9x6.9x5.2”) WEIGHT 0.68kg/1.5lbs
✓ DESIGNED FOR VINYL – Cambridge Audio’s Alva Solo is a dedicated moving magnet phono preamp designed to give you a superb sonic experience from your favorite record collection using its switch mode power supply and surface mounted circuit board.✓ ATTENTION TO DETAIL – The Alva Duo\'s switch mode power supply and surface mount technology delivers short signal paths and a faster response with precision and lower background noise so you don\'t hear a hum over the vinyl\'s low-level signals.✓ SUBSONIC FILTER & BALANCE CONTROL – The Alva Solo will even work if your vinyls are a little worse for wear. The subsonic filter and balance control eliminate low frequency rumbles from imperfections in your vinyl for an accurate soundstage.✓ GREAT ADDITION TO ANY AMP – The Alva Solo is a perfect for your amp that doesn’t have a phono preamp built in or a great upgrade for your amp with one built in. You will notice more smoothness and warmth with less distortion and background noise.✓ TECH SPECS - MAX POWER CONSUMPTION 10W, GAIN @ 1KHZ 39dB, NOMINAL OUTPUT 300mV, SENSITIVITY FOR NOMINAL OUTPUT 3.35mV, EQUIVALENT INPUT NOISE ~0.09uV, RIAA CURVE ACCURACY +/- 0.65dB 30Hz-20kHz, DIMENSIONS (H X W X D) 1.9x6.9x5.2”, WEIGHT 1.5lbs
상품설명
Enjoy every last detail from your vinyl collection with our highest quality moving magnet phono stage, the Solo Phono Preamplifier. TECH SPECS MAX POWER CONSUMPTION 10W GAIN @ 1KHZ 39dB NOMINAL OUTPUT 300mV SENSITIVITY FOR NOMINAL OUTPUT 3.35mV EQUIVALENT INPUT NOISE (A-WEIGHTED) ~0.09uV RIAA CURVE ACCURACY +/- 0.65dB 30Hz-20kHz SIGNAL TO NOISE RATIO GROUNDED INPUTS REF. 1V OUTPUT (20HZ-20KHZ BW) >90dB THD+N 1KHZ (20-20KHZ BW) <0.0025% INPUT IMPEDANCE 47k Ohm INPUT CAPACITANCE 100pF OVERLOAD MARGIN >30dB CROSSTALK @10KHZ >85dB DIMENSIONS (H X W X D) 48x176x132 (1.9x6.9x5.2”) WEIGHT 0.68kg/1.5lbs
2019-04-02 05:18:16
