TargetEvo 6 Loop 1/2 PEX Manifold Stainless Steel Radiant Floor Heating Set Kit with Adjustable Flow Valves Automatic Air Vent
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.SIZE: The entire manifold measures approximately 15.7" x 13.7" (4 Loop) / 18.9" x 13.7" (6 Loop)FEATURES: The radiant floor heating system include body flow meters with adjustable flow rates, 1/2" Compression Connectors, Isolation ball valve with 1" NPT thread, Automatic air vent for air elimination, Heavy duty mounting bracketsEASY INSTALLATION: As this set is pressure tested and pre-assembled, so it can be simply installed and connectedMATERIAL: Made of 304 Stainless Steel, corrosion resistant and durable material for long service lifeNEED YOUR ATTENTION: The maximum pressure value of the system must be less than 1.2 Mpa
상품설명
Test: 1.Open inlet and drain valve, the water in mainfold pipe enters the water distributor. Take off the red protective cap of flowmeter, then adjust flowrate. 2.Open automatic air vent, the air inside the water distributor will run out. 3.Test the system in running state to make sure there is no leak point. Test time should be 24 hours. (The pressure is under 1.0-1.2Mpa) 4.Check carefully to make sure there is no warer seepage or dripping in the connection point of each part. If there is any problem, please close the inlet and drain valve first.Then repair the pipe and test again. 5.The system test index can meet the requirement of user. Note: 1.The maximum pressure value of the system must under 1.2 Mpa. 2.Not suitable for drinking wate. Specification: Material: 304 stainless steel Color: silver The whole size of 4 loop: 15.7 x 13.7 inches The whole size of 6 loop: 18.9 x 13.7 inches Finish: Polishing & brush Installation: Bracket Work temperature: 33.8 F - 203 F Mainfold diameter: G 1"" (DN25) Branch pipe diameter: G1/2 - DN15£¨PEX Both ends of the main tread: G 1" Thread (Female) Working medium: water, vapor Branch interval: 50mm Applicable pressure: 1.5Mpa Mainfold trunk size: equivalent of DN40 Temperature control: 3mm Delivery: 1 * 304 stainless steel radiant floor heating
Make sure this fits by entering your model number.SIZE: The entire manifold measures approximately 15.7" x 13.7" (4 Loop) / 18.9" x 13.7" (6 Loop)FEATURES: The radiant floor heating system include body flow meters with adjustable flow rates, 1/2" Compression Connectors, Isolation ball valve with 1" NPT thread, Automatic air vent for air elimination, Heavy duty mounting bracketsEASY INSTALLATION: As this set is pressure tested and pre-assembled, so it can be simply installed and connectedMATERIAL: Made of 304 Stainless Steel, corrosion resistant and durable material for long service lifeNEED YOUR ATTENTION: The maximum pressure value of the system must be less than 1.2 Mpa
상품설명
Test: 1.Open inlet and drain valve, the water in mainfold pipe enters the water distributor. Take off the red protective cap of flowmeter, then adjust flowrate. 2.Open automatic air vent, the air inside the water distributor will run out. 3.Test the system in running state to make sure there is no leak point. Test time should be 24 hours. (The pressure is under 1.0-1.2Mpa) 4.Check carefully to make sure there is no warer seepage or dripping in the connection point of each part. If there is any problem, please close the inlet and drain valve first.Then repair the pipe and test again. 5.The system test index can meet the requirement of user. Note: 1.The maximum pressure value of the system must under 1.2 Mpa. 2.Not suitable for drinking wate. Specification: Material: 304 stainless steel Color: silver The whole size of 4 loop: 15.7 x 13.7 inches The whole size of 6 loop: 18.9 x 13.7 inches Finish: Polishing & brush Installation: Bracket Work temperature: 33.8 F - 203 F Mainfold diameter: G 1"" (DN25) Branch pipe diameter: G1/2 - DN15£¨PEX Both ends of the main tread: G 1" Thread (Female) Working medium: water, vapor Branch interval: 50mm Applicable pressure: 1.5Mpa Mainfold trunk size: equivalent of DN40 Temperature control: 3mm Delivery: 1 * 304 stainless steel radiant floor heating
2019-04-15 03:08:27
