Mighty Mite Vintage Amber Neck for Strat, Indian Rosewood Fingerboard
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Shaped, inlaid, fretted and finished—feels and plays greatHard rock maple with a thin, vintage tint finishEach neck has a single-action truss rod and traditional "skunk stripe" down the backPeghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushingFeatures 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)
상품설명
Shaped, inlaid, fretted and finished—looks and plays great! Hard rock maple with a thin, vintage tint finish, and an inlaid "skunk stripe" down the back. Other features include: Thin polyurethane finish Slotted and shaped PPS plastic string nut, with flat bottom 22 frets Indian Rosewood fingerboard Peghead-adjustable truss rod (for 4mm Allen wrench) Traditional dot inlays Without mounting holes, so you can drill to fit your body Peghead drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushings. Specifications: Scale length: 25-1/2" (647.70mm) Width at nut: 1-11/16" (42.86mm) Width at 22nd fret: 2-3/16" (55.56mm) Fretwire: .045" high x .095" wide (1.14mm x 2.41mm) Fretboard radius: 9-1/2" (241.30mm) Fret count: 22 String post spread: 4-11/16" (119.06mm) Approximate heel length: 3-5/8" (92.07mm) Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep. Neck thickness (approximate; not including fret): .860" (21.84mm) at the 1st fret .880" (22.35mm) at the 6th fret .890" (22.61mm) at the 12th fret Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don\'t force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.
Shaped, inlaid, fretted and finished—feels and plays greatHard rock maple with a thin, vintage tint finishEach neck has a single-action truss rod and traditional "skunk stripe" down the backPeghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushingFeatures 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)
상품설명
Shaped, inlaid, fretted and finished—looks and plays great! Hard rock maple with a thin, vintage tint finish, and an inlaid "skunk stripe" down the back. Other features include: Thin polyurethane finish Slotted and shaped PPS plastic string nut, with flat bottom 22 frets Indian Rosewood fingerboard Peghead-adjustable truss rod (for 4mm Allen wrench) Traditional dot inlays Without mounting holes, so you can drill to fit your body Peghead drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushings. Specifications: Scale length: 25-1/2" (647.70mm) Width at nut: 1-11/16" (42.86mm) Width at 22nd fret: 2-3/16" (55.56mm) Fretwire: .045" high x .095" wide (1.14mm x 2.41mm) Fretboard radius: 9-1/2" (241.30mm) Fret count: 22 String post spread: 4-11/16" (119.06mm) Approximate heel length: 3-5/8" (92.07mm) Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep. Neck thickness (approximate; not including fret): .860" (21.84mm) at the 1st fret .880" (22.35mm) at the 6th fret .890" (22.61mm) at the 12th fret Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don\'t force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.
2022-05-19 21:27:36