Mighty Mite Neck for Strat Guitar, Indian Rosewood Fingerboard
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Shaped, inlaid, fretted and finished—feels and plays greatHard rock maple finished in clear satin polyurethaneEach neck has a single-action truss rod and traditional "skunk stripe" down the backPeghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushingFeatures 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)
상품설명
Shaped, inlaid, fretted and finished—feels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back. Other features include: The frets are nicely finished. The string nut is slotted and shaped from PPS plastic with a flat bottom. Indian Rosewood fretboard with dot inlays and side markers. Screwholes for attaching to the body are not drilled. Has a single-action truss rod with a 4mm adjusting nut at the peghead (we recommend a 4mm Allen Truss Rod Wrench for adjusting neck relief). Peghead is drilled for 6-in-line tuning machines. 10mm-diameter holes fit sealed gear tuners with threaded peghead bushings. Specifications: Scale length: 25-1/2" (647.70mm) Width at nut: 1-11/16" (42.86mm) Width at 22nd fret: 2-3/16" (55.56mm) Fretwire: .045" high x .095" wide (1.14mm x 2.41mm) Fretboard radius: 9-1/2" (241.30mm) Fret count: 22 String post spread: 4-11/16" (119.06mm) Approximate heel length: 3-5/8" (92.07mm) Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep. Neck thickness (approximate; not including fret): .860" (21.84mm) at the 1st fret .880" (22.35mm) at the 6th fret .890" (22.61mm) at the 12th fret Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don\'t force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.
Shaped, inlaid, fretted and finished—feels and plays greatHard rock maple finished in clear satin polyurethaneEach neck has a single-action truss rod and traditional "skunk stripe" down the backPeghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushingFeatures 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)
상품설명
Shaped, inlaid, fretted and finished—feels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back. Other features include: The frets are nicely finished. The string nut is slotted and shaped from PPS plastic with a flat bottom. Indian Rosewood fretboard with dot inlays and side markers. Screwholes for attaching to the body are not drilled. Has a single-action truss rod with a 4mm adjusting nut at the peghead (we recommend a 4mm Allen Truss Rod Wrench for adjusting neck relief). Peghead is drilled for 6-in-line tuning machines. 10mm-diameter holes fit sealed gear tuners with threaded peghead bushings. Specifications: Scale length: 25-1/2" (647.70mm) Width at nut: 1-11/16" (42.86mm) Width at 22nd fret: 2-3/16" (55.56mm) Fretwire: .045" high x .095" wide (1.14mm x 2.41mm) Fretboard radius: 9-1/2" (241.30mm) Fret count: 22 String post spread: 4-11/16" (119.06mm) Approximate heel length: 3-5/8" (92.07mm) Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep. Neck thickness (approximate; not including fret): .860" (21.84mm) at the 1st fret .880" (22.35mm) at the 6th fret .890" (22.61mm) at the 12th fret Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don\'t force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.
2022-05-19 21:18:24