Degraw DIY Speaker Kit - PAM8403 5V Amplifier + 2Pcs 4 ohm, 3 watt Speakers - Mini Class D Digital Audio Amplifier amp Board Module kit for Arduino, Includes 3.5mm Plug!
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Updated version, quality is improved! Everything you need except a power supply for adding sound to a project.PAM8403 - Powerful and small Class D amplifier mounted on a 28 x 20 mm breakout board. Includes a super smooth potentiometer combination volume / on-off knob. Also includes header pins.Mini speakers - 2 pcs. 4 ohm, 3w, 31 mm x 70 mm. The same speakers found in flatscreen TV\'s and monitors.3.5 mm cord - Includes 50 cm (19 in) headphone style cord and plug for easy phone or Raspberry Pi connectionEasily power the kit with any 5V supply (not included): USB cell phone charger, 3 AA batteries, or a cell phone battery bank. Soldering required (header pins included). Do not apply power to the amplifier without speakers connected, this will result in damage to the amplifier.
상품설명
Package contents: 1 x PAM8403 amplifier on breakout board 2 x 4 ohm, 3 watt oval speakers 10 x Breakaway header pins for PAM8403 connection 1 x 50 cm (19 in) cord with 3.5 mm audio plug Everything you need except a power supply to make speakers in one complete package! Information Speakers - Sturdy steel construction with easy-to-solder lugs and 3.3 mm mounting holes. These speakers are often used in commercial flat screen monitors. PAM8403 - This top of the line class D amplifier mounted on a breakout board pairs perfectly with the speakers to provide great sound. Speaker specs: -4 ohm, 3 watt power -Wires already attached -31 mm wide, 70 mm high, 18 mm deep. -4 mounting holes, 3 mm diameter. PAM8403 specs: -Operation Voltage: 5V. Get power from USB supply, 3 AA batteries, or cell phone battery bank (power supply not included) -Output power: 3w + 3w (3 watts to each speaker) -Efficiency: up to 90% -Knob: smooth turning knob to adjust volume and turn unit on / off -Mounting: drill a hole and mount using the volume knob with the included nut and washer -Includes breakaway headers for connection, soldering required Connections: Refer to diagram picture for wiring Note: do not connect (-) or (+) speaker connections together, this will damage the amplifier Note: do not apply power without speakers connected, this will damage the amplifier
Updated version, quality is improved! Everything you need except a power supply for adding sound to a project.PAM8403 - Powerful and small Class D amplifier mounted on a 28 x 20 mm breakout board. Includes a super smooth potentiometer combination volume / on-off knob. Also includes header pins.Mini speakers - 2 pcs. 4 ohm, 3w, 31 mm x 70 mm. The same speakers found in flatscreen TV\'s and monitors.3.5 mm cord - Includes 50 cm (19 in) headphone style cord and plug for easy phone or Raspberry Pi connectionEasily power the kit with any 5V supply (not included): USB cell phone charger, 3 AA batteries, or a cell phone battery bank. Soldering required (header pins included). Do not apply power to the amplifier without speakers connected, this will result in damage to the amplifier.
상품설명
Package contents: 1 x PAM8403 amplifier on breakout board 2 x 4 ohm, 3 watt oval speakers 10 x Breakaway header pins for PAM8403 connection 1 x 50 cm (19 in) cord with 3.5 mm audio plug Everything you need except a power supply to make speakers in one complete package! Information Speakers - Sturdy steel construction with easy-to-solder lugs and 3.3 mm mounting holes. These speakers are often used in commercial flat screen monitors. PAM8403 - This top of the line class D amplifier mounted on a breakout board pairs perfectly with the speakers to provide great sound. Speaker specs: -4 ohm, 3 watt power -Wires already attached -31 mm wide, 70 mm high, 18 mm deep. -4 mounting holes, 3 mm diameter. PAM8403 specs: -Operation Voltage: 5V. Get power from USB supply, 3 AA batteries, or cell phone battery bank (power supply not included) -Output power: 3w + 3w (3 watts to each speaker) -Efficiency: up to 90% -Knob: smooth turning knob to adjust volume and turn unit on / off -Mounting: drill a hole and mount using the volume knob with the included nut and washer -Includes breakaway headers for connection, soldering required Connections: Refer to diagram picture for wiring Note: do not connect (-) or (+) speaker connections together, this will damage the amplifier Note: do not apply power without speakers connected, this will damage the amplifier
2020-08-18 11:24:01