FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
아마존 홈               
사진확대

Posi Lock 110 Manual Puller, 3 Jaws, 20 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" Overall Length (2-Pack)
ASIN번호 B07CS9HCNH
상품상태 New   
상품구분 Industrial & Scientific / Material Handling Products
브랜드 Posi Lock Puller
판매자 미정
판매자위치 미확인
Size Name
현지 판매 가격
$279.29
상품가격 상세보기
관련상품



상품특징
Make sure this fits by entering your model number.Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleysThree-jaw construction ensures equal load distribution, secure hold, and concentric pulling actionForged steel jaws for increased strength over investment casting20-ton pulling capacity, 9.67" (246mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverageTapered jaws for better access in tight spaces
상품설명
Size Name:2 Pack This Posi Lock 110 manual puller has a 20-ton pulling capacity; has three jaws for equal load distribution, secure hold, and concentric pulling action; and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. The center bolt has a 0.75" (19 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 9.67" (246 mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others. Specifications Puller3-jaw Pulling capacity20 tons Center bolt diameter0.75" (19 mm) Reach9.67" (246 mm) Spread range1 to 15 inches (25 to 381 mm) Maximum torque275 ft-lb. (372 N-m) Hex socket size1" (25.4 mm) Overall length20.41" (518.4 mm) Jaw width1" (25.4 mm) Weight16 lb. (7.3 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal.








상품특징
Make sure this fits by entering your model number.Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleysThree-jaw construction ensures equal load distribution, secure hold, and concentric pulling actionForged steel jaws for increased strength over investment casting20-ton pulling capacity, 9.67" (246mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverageTapered jaws for better access in tight spaces
상품설명
Size Name:2 Pack This Posi Lock 110 manual puller has a 20-ton pulling capacity; has three jaws for equal load distribution, secure hold, and concentric pulling action; and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. The center bolt has a 0.75" (19 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 9.67" (246 mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others. Specifications Puller3-jaw Pulling capacity20 tons Center bolt diameter0.75" (19 mm) Reach9.67" (246 mm) Spread range1 to 15 inches (25 to 381 mm) Maximum torque275 ft-lb. (372 N-m) Hex socket size1" (25.4 mm) Overall length20.41" (518.4 mm) Jaw width1" (25.4 mm) Weight16 lb. (7.3 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal.




2019-03-30 11:54:50