SHZOND Dividing Head Set 3 Jaw Lathe Chuck Dividing Head 5 Inch with Tailstock Dividing Plates for Milling Machine (5 inch dividing head)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
This dividing head set includes headstock, 5" 3-jaw lathe chuck, tailstock, center&driving dog, threaded back plate & 3 dividing plates. 1:40 ratio.Headstock adjustable from 10 downward to 90 degree upward from the horizontal positionBy using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demandThe 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing3 dividing plates are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers
상품설명
Dividing Head Set 3 Jaw Lathe Chuck Dividing Head 5 Inch with Tailstock Dividing Plates for Milling Machine Workpieces can be divided into any week for the division or straight line for indexing.The workpiece can be installed into the required angle (vertical, horizontal or inclined.through the exchange of gears, the indexing head can be connected with the table drive system, so that the indexing spindle with table feed motion for continuous rotation to milled spiral surface and the rotary surface. Item Specifications Swing: 7-7/8" Center Height : 3-15/16" Headstock Taper: 7 B&S Spindle Bore (Clear Through): .708" Spindle Mount: 1-1/2" x 8 TPI Spindle Taper Runout: .0006" The front of dividing head dimension: 7.59”,5.51”,6.81”,3.93”,6.53”,3.54”,0.63” The tail of the dividing head dimension:6.89”,3.42”,4.21”,3.93”,5.12”,3.62”,0.63” Dividing Plate: Quantity of dividing plate’s hole (Helical gear reduction ratio 1:40) Dividing Plate A: 15,16,17,18,19,20 Dividing Plate B: 21,23,27,29,31,33 Dividing Plate C:37,39,41,43,47,49 Package content Dividing head set x 1 3 x Dividing Plates 1 x Tailstock 1 x 3 Jaw Chuck
This dividing head set includes headstock, 5" 3-jaw lathe chuck, tailstock, center&driving dog, threaded back plate & 3 dividing plates. 1:40 ratio.Headstock adjustable from 10 downward to 90 degree upward from the horizontal positionBy using dividing scale ring, vernier, locating pin, index plate and change gear, workpieces placed can be divided into equal partitions according to your demandThe 24 quick-dividing holes can complete 2, 3, 4, 6, 8, 12, 24 division indexing3 dividing plates are attached along with the dividing head for indirect dividing in any division indexing 2-50, 51-380 except prime numbers and certain other numbers
상품설명
Dividing Head Set 3 Jaw Lathe Chuck Dividing Head 5 Inch with Tailstock Dividing Plates for Milling Machine Workpieces can be divided into any week for the division or straight line for indexing.The workpiece can be installed into the required angle (vertical, horizontal or inclined.through the exchange of gears, the indexing head can be connected with the table drive system, so that the indexing spindle with table feed motion for continuous rotation to milled spiral surface and the rotary surface. Item Specifications Swing: 7-7/8" Center Height : 3-15/16" Headstock Taper: 7 B&S Spindle Bore (Clear Through): .708" Spindle Mount: 1-1/2" x 8 TPI Spindle Taper Runout: .0006" The front of dividing head dimension: 7.59”,5.51”,6.81”,3.93”,6.53”,3.54”,0.63” The tail of the dividing head dimension:6.89”,3.42”,4.21”,3.93”,5.12”,3.62”,0.63” Dividing Plate: Quantity of dividing plate’s hole (Helical gear reduction ratio 1:40) Dividing Plate A: 15,16,17,18,19,20 Dividing Plate B: 21,23,27,29,31,33 Dividing Plate C:37,39,41,43,47,49 Package content Dividing head set x 1 3 x Dividing Plates 1 x Tailstock 1 x 3 Jaw Chuck
2019-08-10 15:14:04