Elvicto Smoke Combination Photoelectric Smoke&Carbon Monoxide Detector 10 Year Battery Operated, Travel Portable Fire and Co Alarm for Home, Kitchen
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Keep your family safer with this smoke and carbon monoxide alarm; the 10-year battery backup means constant monitoring for the life of the alarm even if there's a power failureFeatures an electrochemical Carbon Monoxide sensing technology as well as intelligent smoke sensing technology to reduce nuisance alarms;Indicator lights on the face of the unit display the presence of smoke or carbon monoxide, while an 85-decibel siren provides a clear, loud warning upon detection;Easy to install with mounting included, equipped with end-of-life signal chirp, so you know when it’s time to replace the unit for safety;Rigorously tested to meet UL standards, 10-year limited warranty.
상품설명
Product description co alarm density: 30ppm, alarms not activate within 120 minutes 50ppm, alarms within 60-90 minutes 100ppm, alarm with 10-40 minutes 300ppm, alarm within 3 minutes standby current: 85db(3meters) alarm current: <45ma smoke sensitivity: 1-3%ft working temperature:-10°c~+50°c battery life: 10 years power Supply: dc 3V batteries alarm sound:≥85Db (3 meters) relative humidity:≤95%r.H. feature 1.Led light flash 2. Permanent carbon monoxide sensor 3. The alarm sound pattern is four short alarm beeps. The red LED will flash while in alarm mode 4. One ‘chirp’ every 30 seconds is an indication that the battery is low (need replacement) (Green LED still flashes Once every 30 seconds) or the unit is malfunctioning ( Green LED is out). 5. Alarm memory feature: if the unit ever alarms, pressing the button, Green LED well flashes Once every second for one minute and the peak alarm level will indicate on the LCD. 6. Test/reset button to test the unit Electronics and verifies proper unit operational and reset the unit during Co alarm. 7. Green and red LED lights that indicate normal operation and alarm status 8. 3 digits LCD displayer is optional. ‘Err’ on the LCD to indicate the unit is malfuntioning. ‘LB’ on the LCD to indicate it low battery and need replacement. ‘999ppm’ on the LCD to indicate Co level over 999ppm. If the Co leakage is less than 999ppm but over 30ppm, it would show its ACTUAL concentration. 9. Blue back light will be lighted when pressing the test button or alarming. 10. The unit will sound ‘chirp’ and red LED flashes Once as power up. 11. Power saving feature: the alarm sound pattern is 4 beeps every 5 seconds for the first 4 minutes. In 4 minutes, it will change to 4 beeps every minute to save the battery.
Make sure this fits by entering your model number.Keep your family safer with this smoke and carbon monoxide alarm; the 10-year battery backup means constant monitoring for the life of the alarm even if there's a power failureFeatures an electrochemical Carbon Monoxide sensing technology as well as intelligent smoke sensing technology to reduce nuisance alarms;Indicator lights on the face of the unit display the presence of smoke or carbon monoxide, while an 85-decibel siren provides a clear, loud warning upon detection;Easy to install with mounting included, equipped with end-of-life signal chirp, so you know when it’s time to replace the unit for safety;Rigorously tested to meet UL standards, 10-year limited warranty.
상품설명
Product description co alarm density: 30ppm, alarms not activate within 120 minutes 50ppm, alarms within 60-90 minutes 100ppm, alarm with 10-40 minutes 300ppm, alarm within 3 minutes standby current: 85db(3meters) alarm current: <45ma smoke sensitivity: 1-3%ft working temperature:-10°c~+50°c battery life: 10 years power Supply: dc 3V batteries alarm sound:≥85Db (3 meters) relative humidity:≤95%r.H. feature 1.Led light flash 2. Permanent carbon monoxide sensor 3. The alarm sound pattern is four short alarm beeps. The red LED will flash while in alarm mode 4. One ‘chirp’ every 30 seconds is an indication that the battery is low (need replacement) (Green LED still flashes Once every 30 seconds) or the unit is malfunctioning ( Green LED is out). 5. Alarm memory feature: if the unit ever alarms, pressing the button, Green LED well flashes Once every second for one minute and the peak alarm level will indicate on the LCD. 6. Test/reset button to test the unit Electronics and verifies proper unit operational and reset the unit during Co alarm. 7. Green and red LED lights that indicate normal operation and alarm status 8. 3 digits LCD displayer is optional. ‘Err’ on the LCD to indicate the unit is malfuntioning. ‘LB’ on the LCD to indicate it low battery and need replacement. ‘999ppm’ on the LCD to indicate Co level over 999ppm. If the Co leakage is less than 999ppm but over 30ppm, it would show its ACTUAL concentration. 9. Blue back light will be lighted when pressing the test button or alarming. 10. The unit will sound ‘chirp’ and red LED flashes Once as power up. 11. Power saving feature: the alarm sound pattern is 4 beeps every 5 seconds for the first 4 minutes. In 4 minutes, it will change to 4 beeps every minute to save the battery.
2019-03-25 23:48:55