FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
아마존 홈           
사진확대

UTEK UT-8251 USB 2.0 to CAN BUS Converter
ASIN번호 B07DBPQJWZ
상품상태 New   
상품구분 Electronics / Accessories & Supplies
브랜드 U-Tek
판매자 KOWELL
판매자위치 미확인
현지 판매 가격
$159.91
상품가격 상세보기
관련상품



상품특징
Converts USB 2.0 protocol to CAN BUS protocol ● One USB port, one CAN channel ● Supports CAN controller status monitoredSupports CAN 2.0A & CAN 2.0B protocol, standard frame & extended frame ● Supports bidirectional transmission, CAN transmitting & receiving ● Supports data frame, remote frame formatWith adjustable baudrate of 5kbps-1Mbps for CAN controller by software setting ● CAN BUS interface adopts optics isolation, DC-DC power isolation ● CAN BUS max flow: 4,000 frame/sCAN internal receiving buffer zone capacity: 600Messages (7,800 bytes) ● Dual buffer structure on internal sending, with buffer of 800MessagesUSB powered, no need external power ● Isolated insulative voltage, 2,500Vrms ● Operating temperature: -20~85℃ ● Operating current: <100mA ● Dimension: 112.5mm x 64mm x 25mm, Aluminum
상품설명
UT-8251 is a USB to CAN converter. It adopts USB 2.0 protocol; there is no need for user to install USB drive, plug & play. User connects the converter with CAN BUS; this makes the PC convenient to debug the field BUS device for data collection and control. UT-8251 design fully considers the bad electronic environment of field BUS. CAN BUS circuit use independent DC-DC power module for optoelectronic isolation. The strong anti-interference function greatly improves the reliability in poor environment. It adopts high-capacity data buffer technology and real-time transmission technology to get high data throughput rate. UT-8251 is widely used in lab, industrial control, smart building, and automobile for data collection, transmission and control. UTEK PC software is designed for CAN BUS equipment data receiving and transmitting. You can also use UTEK DLL dynamic connection base to program your own software, or integrated it into current software. There is no need for user to understand USB protocol to control the CAN BUS by directly using the interface function.
























상품특징
Converts USB 2.0 protocol to CAN BUS protocol ● One USB port, one CAN channel ● Supports CAN controller status monitoredSupports CAN 2.0A & CAN 2.0B protocol, standard frame & extended frame ● Supports bidirectional transmission, CAN transmitting & receiving ● Supports data frame, remote frame formatWith adjustable baudrate of 5kbps-1Mbps for CAN controller by software setting ● CAN BUS interface adopts optics isolation, DC-DC power isolation ● CAN BUS max flow: 4,000 frame/sCAN internal receiving buffer zone capacity: 600Messages (7,800 bytes) ● Dual buffer structure on internal sending, with buffer of 800MessagesUSB powered, no need external power ● Isolated insulative voltage, 2,500Vrms ● Operating temperature: -20~85℃ ● Operating current: <100mA ● Dimension: 112.5mm x 64mm x 25mm, Aluminum
상품설명
UT-8251 is a USB to CAN converter. It adopts USB 2.0 protocol; there is no need for user to install USB drive, plug & play. User connects the converter with CAN BUS; this makes the PC convenient to debug the field BUS device for data collection and control. UT-8251 design fully considers the bad electronic environment of field BUS. CAN BUS circuit use independent DC-DC power module for optoelectronic isolation. The strong anti-interference function greatly improves the reliability in poor environment. It adopts high-capacity data buffer technology and real-time transmission technology to get high data throughput rate. UT-8251 is widely used in lab, industrial control, smart building, and automobile for data collection, transmission and control. UTEK PC software is designed for CAN BUS equipment data receiving and transmitting. You can also use UTEK DLL dynamic connection base to program your own software, or integrated it into current software. There is no need for user to understand USB protocol to control the CAN BUS by directly using the interface function.




















2019-03-30 11:03:27