Genuine Bondtech Raise3D SingelDirect Upgrade (EXT-KIT-53)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Genunie Bondtech PartsThis product uses lightweight Nema17 Pancake stepper motors combined with a 3:1 internal gearing ratio and our proven DualDrive gearsThe body parts are manufactured with SLS printing in high strength ployamide (nylon)Drive gears are precision cnc-machined in hardened steel for maximum performance and lifetimeInstallation is done in about 20 minutes
상품설명
This new compact, lightweight extruder upgrade for Raise3D printers will solve your feeding problems, improves surface quality and make it possible to print with faster speeds with sustained quality.This product uses lightweight Nema17 Pancake stepper motors combined with a 3:1 internal gearing ratio and our proven DualDrive gears.The body parts are manufactured with SLS printing in high strength ployamide (nylon).Drive gears are precision cnc-machined in hardened steel for maximum performance and lifetime.This upgrade fits both the Revision 1 (casted) and Revision 2(cnc-milled) version of the printhead.Installation is done in about 20 minutes.Original extruder setup on Raise3D is 532g for singel setup this new upgrade is 252g with the included motor and it allows for faster printing without surface issues due to vibration during accelerations/deaccelerations.The extruder is euipped with a pushfit connectors for 4 mm guide tube that will let you connect the existing guide tube to the extruder. Tube are not included.Plug & Play solution, no need to cut and solder wires.Please select what type of motor you have on your printer (silver colored = older, black = newer)Kit contains everything you need to rebuild your printer.1 x DualDirect extruder with motors 1 x Breakout board coverWeight: 252g E-step value: 415 Current for motor: 0.7A (Vref setting = 0.5V)Use newest version for Touch panel (0.9.2) to set E-steps value directly on the printer.
Make sure this fits by entering your model number.Genunie Bondtech PartsThis product uses lightweight Nema17 Pancake stepper motors combined with a 3:1 internal gearing ratio and our proven DualDrive gearsThe body parts are manufactured with SLS printing in high strength ployamide (nylon)Drive gears are precision cnc-machined in hardened steel for maximum performance and lifetimeInstallation is done in about 20 minutes
상품설명
This new compact, lightweight extruder upgrade for Raise3D printers will solve your feeding problems, improves surface quality and make it possible to print with faster speeds with sustained quality.This product uses lightweight Nema17 Pancake stepper motors combined with a 3:1 internal gearing ratio and our proven DualDrive gears.The body parts are manufactured with SLS printing in high strength ployamide (nylon).Drive gears are precision cnc-machined in hardened steel for maximum performance and lifetime.This upgrade fits both the Revision 1 (casted) and Revision 2(cnc-milled) version of the printhead.Installation is done in about 20 minutes.Original extruder setup on Raise3D is 532g for singel setup this new upgrade is 252g with the included motor and it allows for faster printing without surface issues due to vibration during accelerations/deaccelerations.The extruder is euipped with a pushfit connectors for 4 mm guide tube that will let you connect the existing guide tube to the extruder. Tube are not included.Plug & Play solution, no need to cut and solder wires.Please select what type of motor you have on your printer (silver colored = older, black = newer)Kit contains everything you need to rebuild your printer.1 x DualDirect extruder with motors 1 x Breakout board coverWeight: 252g E-step value: 415 Current for motor: 0.7A (Vref setting = 0.5V)Use newest version for Touch panel (0.9.2) to set E-steps value directly on the printer.
2019-07-02 00:52:15