uxcell DC130V 10W 1.2-12L/min 8mm Two Wires Magnetic Type Water Flow Switch Flow Counter
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Light weight, small size, easy to install.Hall element is imported, water-proof design to prevent water ingress,The inside of the impeller is inlaid with a stainless steel shaft and is always wear-resistant.All materials are in line with SGS testing standards.The water flow sensor is applied for water heater, and can be used as flow switch.Flow range: 1.2-12L/min.Max Switch Voltage: DC130V; Max Contact Rating: 10W
상품설명
1. The Water Flow Sensor is light, nimble outline, small size and easy to install. The bearings used in the rotating part. All materials are in line with SGS testing standards. 2. There is an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry. 3. Three wire connection: Red for positive, black for negative, yellow for pulse signal. Specifications: Product Name: Water Flow Sensor Material: POM(Shell) Liquid Temperature: Not More Than 60C Rated Voltage: DC 130V Max Current: 0.3A(DC 130V) Maximum water pressure: 1.2MPa Connector Size: 8mm Connector: Male XH-3P Ingress Protection Rating: IP65 Color: White Package Included: 1 x Water Flow Sensor Note: 1. Installed in accordance with flow direction in the back of product, otherwise there is no signal output. 2. A filter screen must be installed at the inlet of the sensor, in order to avoid particles and debris entering the sensor .
Light weight, small size, easy to install.Hall element is imported, water-proof design to prevent water ingress,The inside of the impeller is inlaid with a stainless steel shaft and is always wear-resistant.All materials are in line with SGS testing standards.The water flow sensor is applied for water heater, and can be used as flow switch.Flow range: 1.2-12L/min.Max Switch Voltage: DC130V; Max Contact Rating: 10W
상품설명
1. The Water Flow Sensor is light, nimble outline, small size and easy to install. The bearings used in the rotating part. All materials are in line with SGS testing standards. 2. There is an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry. 3. Three wire connection: Red for positive, black for negative, yellow for pulse signal. Specifications: Product Name: Water Flow Sensor Material: POM(Shell) Liquid Temperature: Not More Than 60C Rated Voltage: DC 130V Max Current: 0.3A(DC 130V) Maximum water pressure: 1.2MPa Connector Size: 8mm Connector: Male XH-3P Ingress Protection Rating: IP65 Color: White Package Included: 1 x Water Flow Sensor Note: 1. Installed in accordance with flow direction in the back of product, otherwise there is no signal output. 2. A filter screen must be installed at the inlet of the sensor, in order to avoid particles and debris entering the sensor .
2020-02-10 22:56:06