ESP32 Camera Module(Ar duino Camera, Raspberry Pi Camera), OV2640 2 Mega Pixels Camera, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B+ IOT DIY
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
★M5Stack ESP32 Camera: The M5Stack ESP32 Camera is a tiny module based on ESP32 chip and OV2640 sensor. You can program it through the ESP-IDF. The board reserved the MPU6050,BME280 and an analog MIC.This module with a IP5306 IC chip and it can be used with lithium battery (Standard voltage: 3.7V4.2V).★OV2640 Camera Module: The camera is CMOS camera, CMOS size: 1/4", field of view : 65 degree, maxmium Pixel: 200M pixels (Because of the small RAM, the board can’t obtain it. It can output images up to 800*600 JPEG.)★OV2640 Sensor's Parameter:Standard SCCB interface, compatible with I2C interface;Output Formats(8-bit) is YUV(422/420)/YCbCr422; RGB565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive.★For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups amd Maker groups.
상품설명
Color:ESP32 Camera Module ESP32 Camera Module, OV2640 2 Mega Pixels Camera 1632 * 1232 UXGA, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Ar duino, Raspberry Pi 3B/3B+ and Pi 2B B+ IOT DIY Parameters: ESP32 Chip: Dual-core Tensilica LX6 microprocessor Up to 240MHz clock frequency 520kB internal RAM 4MB Flash memory Integrated 802.11 BGN WiFi transceiver Integrated dual-mode Bluetooth (classic and BLE) Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096) CP2104 USB TTL OV2640 sensor: Standard SCCB interface, compatible with I2C interface Output Formats(8-bit): YUV(422/420)/YCbCr422 RGB565/555 8-bit compressed data 8-/10-bit Raw RGB data Maximum Image Transfer Rate UXGA/SXGA: 15fps SVGA: 30fps CIF: 60fps Scan Mode: Progressive Camera: CMOS size: 1/4" Field of View : 78° best sensor resolution: 1600 * 1200 IO voltage: 1.7V-3.3V Analog voltage: 2.5-3.0v (internal LDO powers 1.2V to the core) Power Consumption: TBD Sleep andlt;20μA Temperature Operation: -30°C to 70°C Stable work: 0°C to 50°C Maximum rms rate: 15fps SXGA Sensitivity: 1.3V/(Lux-sec) Signal to noise ratio: 40 dB Dynamic range: 50 dB Scan Mode: Progressive Electronic exposure: Line 1 to Line 1247 Pixel area: 2.2μm x 2.2μm Dark current: 15mV/s at 60°C Package Including: 1 * EESP32 Module Development Board with OV2640 Camera
★M5Stack ESP32 Camera: The M5Stack ESP32 Camera is a tiny module based on ESP32 chip and OV2640 sensor. You can program it through the ESP-IDF. The board reserved the MPU6050,BME280 and an analog MIC.This module with a IP5306 IC chip and it can be used with lithium battery (Standard voltage: 3.7V4.2V).★OV2640 Camera Module: The camera is CMOS camera, CMOS size: 1/4", field of view : 65 degree, maxmium Pixel: 200M pixels (Because of the small RAM, the board can’t obtain it. It can output images up to 800*600 JPEG.)★OV2640 Sensor's Parameter:Standard SCCB interface, compatible with I2C interface;Output Formats(8-bit) is YUV(422/420)/YCbCr422; RGB565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive.★For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups amd Maker groups.
상품설명
Color:ESP32 Camera Module ESP32 Camera Module, OV2640 2 Mega Pixels Camera 1632 * 1232 UXGA, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Ar duino, Raspberry Pi 3B/3B+ and Pi 2B B+ IOT DIY Parameters: ESP32 Chip: Dual-core Tensilica LX6 microprocessor Up to 240MHz clock frequency 520kB internal RAM 4MB Flash memory Integrated 802.11 BGN WiFi transceiver Integrated dual-mode Bluetooth (classic and BLE) Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096) CP2104 USB TTL OV2640 sensor: Standard SCCB interface, compatible with I2C interface Output Formats(8-bit): YUV(422/420)/YCbCr422 RGB565/555 8-bit compressed data 8-/10-bit Raw RGB data Maximum Image Transfer Rate UXGA/SXGA: 15fps SVGA: 30fps CIF: 60fps Scan Mode: Progressive Camera: CMOS size: 1/4" Field of View : 78° best sensor resolution: 1600 * 1200 IO voltage: 1.7V-3.3V Analog voltage: 2.5-3.0v (internal LDO powers 1.2V to the core) Power Consumption: TBD Sleep andlt;20μA Temperature Operation: -30°C to 70°C Stable work: 0°C to 50°C Maximum rms rate: 15fps SXGA Sensitivity: 1.3V/(Lux-sec) Signal to noise ratio: 40 dB Dynamic range: 50 dB Scan Mode: Progressive Electronic exposure: Line 1 to Line 1247 Pixel area: 2.2μm x 2.2μm Dark current: 15mV/s at 60°C Package Including: 1 * EESP32 Module Development Board with OV2640 Camera
2021-01-06 23:56:02
