YOTINO 5PCS HC-SR04 Ultrasonic Module Distance Measuring Transducer Sensor for Arduino
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.1.HC-SR04 ultrasonic module can offer non-contact distance whose range sensing is up to 2mm function with the range of 2cm - 400cm. And the range accuracy is up to 2mm. for the design, development production and marketing of arduino, 3d printers, raspberry pi and STM322.Module includes ultrasonic transmitter, receiver and control circuit.Package: 5pcs HC-SR04,20-pin dupong line included3.Working voltage: DC 5V,Static current: less than 2mA,Output signal: Electric frequency signal, high level 5V, low level 0V4.Sensor angle: not more than 15 degrees,Detection distance: 2cm-450cm,High precision: up to 0.3cm5.Input trigger signal: 10us TTL impulse,Echo signal : output TTL PWL signal,Mode of connection: VCC,trig (control side),echo (receiving end),GND
상품설명
YOTINO HC-SR04 Ultrasonic Module Distance Sensor for Arduino UNO MEGA2560 Nano Robot XBee ZigBee HC-SR04 Module main technical parameters: Voltage: DC 5V The Static Current: less than 2mA Output Signal: Electric frequency signal, high level 5V, low level 0V Sensor Angle: less than 15 degrees Detection Distance: 2cm-450cm Trigger Input Pulse width: 10uS Precision: 3mm Size: 45*20*15mm/1.77*0.78*0.59inch Connection: VCC/ trig(T)/ Echo(R)/ GND (VCC supply 5V, and GND is ground wire. TRIG is trigger control signal input, ECHO is echo signal output.) NOTE: 1.The module should be inserted in the circuit before been powered to avoid producing high level of misoperation; if produced, power it again. 2.The module is not suggested to connect directly to electric, if connected electric, the GND terminal should be connected the module first, otherwise, it will affect the normal work of the module. 3.When tested objects, the range of area is not less than 0.5 square meters and the plane requests as smooth as possible, otherwise ,it will affect the results of measuring. Package included: 5 x HC-SR04 ultrasonic measuring sensor module 1 x 20-pin DuPont cable
Make sure this fits by entering your model number.1.HC-SR04 ultrasonic module can offer non-contact distance whose range sensing is up to 2mm function with the range of 2cm - 400cm. And the range accuracy is up to 2mm. for the design, development production and marketing of arduino, 3d printers, raspberry pi and STM322.Module includes ultrasonic transmitter, receiver and control circuit.Package: 5pcs HC-SR04,20-pin dupong line included3.Working voltage: DC 5V,Static current: less than 2mA,Output signal: Electric frequency signal, high level 5V, low level 0V4.Sensor angle: not more than 15 degrees,Detection distance: 2cm-450cm,High precision: up to 0.3cm5.Input trigger signal: 10us TTL impulse,Echo signal : output TTL PWL signal,Mode of connection: VCC,trig (control side),echo (receiving end),GND
상품설명
YOTINO HC-SR04 Ultrasonic Module Distance Sensor for Arduino UNO MEGA2560 Nano Robot XBee ZigBee HC-SR04 Module main technical parameters: Voltage: DC 5V The Static Current: less than 2mA Output Signal: Electric frequency signal, high level 5V, low level 0V Sensor Angle: less than 15 degrees Detection Distance: 2cm-450cm Trigger Input Pulse width: 10uS Precision: 3mm Size: 45*20*15mm/1.77*0.78*0.59inch Connection: VCC/ trig(T)/ Echo(R)/ GND (VCC supply 5V, and GND is ground wire. TRIG is trigger control signal input, ECHO is echo signal output.) NOTE: 1.The module should be inserted in the circuit before been powered to avoid producing high level of misoperation; if produced, power it again. 2.The module is not suggested to connect directly to electric, if connected electric, the GND terminal should be connected the module first, otherwise, it will affect the normal work of the module. 3.When tested objects, the range of area is not less than 0.5 square meters and the plane requests as smooth as possible, otherwise ,it will affect the results of measuring. Package included: 5 x HC-SR04 ultrasonic measuring sensor module 1 x 20-pin DuPont cable
2019-04-30 05:04:53
