Heavy Duty Furniture Leveler Tee Nut Kit – Set of 4-3/8-16 Non-Skid Leg Levelers for Cabinets or Tables to Adjust Height of The Legs or Feet Jam Nuts to Stabilize Each Foot (Kit with 4 Prong T-Nuts)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Set of 4 – Adjustable Heavy Duty Leveling Feet - 3/8-16 Thread with 1 3/8 inches of Adjustment1 11/16 inch Non Skid TPR (Rubber Like) Base with Steel Nickle Plated Cover Shell4 Prong 3/8-16 Zinc Plated Tee NutsJam Nuts are Included to Lock and Stabilize LevelerSlot on the Top and a Nut on the Base of Foot to Adjust Height
상품설명
Style:Kit with 4 Prong T-Nuts Heavy Duty Furniture Leveler Kit – Set of 4 - 3/8-16 Non-Skid Leg Levelers With T-Nuts and Jam Nuts Directions to Install: 1. Mark a 7/16 Drill bit to drill 1-5/8 inches deep 2. Drill the leg of the Table to the depth Marked on the Drill bit 3. Tap T-Nut firmly into place driving the prongs into the wood 4. Thread Jam nut onto Swivel Glide Leveler and then thread into T-nut 5. Repeat for all legs 6. Level table with a 1/2 wrench turning Nut on Leveler to obtain proper height 7. Use 9/16 wrench to tighten jam nut against T-Nut to stabilize and secure Leveler (If needed) Note: Jam Nuts can be discarded if not needed or to lower table more.
Make sure this fits by entering your model number.Set of 4 – Adjustable Heavy Duty Leveling Feet - 3/8-16 Thread with 1 3/8 inches of Adjustment1 11/16 inch Non Skid TPR (Rubber Like) Base with Steel Nickle Plated Cover Shell4 Prong 3/8-16 Zinc Plated Tee NutsJam Nuts are Included to Lock and Stabilize LevelerSlot on the Top and a Nut on the Base of Foot to Adjust Height
상품설명
Style:Kit with 4 Prong T-Nuts Heavy Duty Furniture Leveler Kit – Set of 4 - 3/8-16 Non-Skid Leg Levelers With T-Nuts and Jam Nuts Directions to Install: 1. Mark a 7/16 Drill bit to drill 1-5/8 inches deep 2. Drill the leg of the Table to the depth Marked on the Drill bit 3. Tap T-Nut firmly into place driving the prongs into the wood 4. Thread Jam nut onto Swivel Glide Leveler and then thread into T-nut 5. Repeat for all legs 6. Level table with a 1/2 wrench turning Nut on Leveler to obtain proper height 7. Use 9/16 wrench to tighten jam nut against T-Nut to stabilize and secure Leveler (If needed) Note: Jam Nuts can be discarded if not needed or to lower table more.
2019-04-06 00:32:20