Radiolink R12DS 2.4GHz RC Receiver 12 Channels SBUS/PWM Voltage Telemetry Long Range Control for Airplane RC Transmitter AT10II AT9S Pro
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Stronger Anti-interference: DSSS&FHSS communication technology makes R12DS receiver with stable transmission signal, control distance up to 2.4 miles in the air. (Actually control range depends on the using environment)12 Channels: with standard SBUS/PWM signal output, high resolution ratio of 4096, fast Respone for all channels. Make sure SYSTEM CH seletion is 12CH mode when it works with AT9S/AT9S Pro transmitter, otherwise that will cannot work.Real-time Information: When works with PRM-03 module and flight controller APM/Pixhawk/Mini PIX, it provides vital information on Radiolink transmitter screen, like voltage, RSSI, flight mode, etc.Quick to Bind: Just press bind button over 1 second, no need any setting on transmitter when they are binding.Anti-polarity Protection: With reverse polarity protection circuit, won't damage the receiver even you plug wrong polarity. 4.6-10v DC, support high voltage servo.
상품설명
DSSS&FHSS reduce overall signal interference allow the R12DS to produce a highly constant and stable transmission signal. Please Note: 1. R12DS only work with Radiolink transmitter products: AT9S Pro, AT9S, AT9,AT10,AT10II. 2. Short push the ID set switch 2 times within 1 second it can change signal, while the LED change to red, it indicates PWM signal output, the blue/purple LED indicates SBUS signal output. 3. Please make sure your Radio's alway 12CH, go to your radio MENU—SYSTEM—CH-SELECT: 12CH How to Match Code With Transmitter: 1. Put the transmitter and the receiver close to each other within 50 cm. 2. Turn on the transmitter and R12DS. 3. There is a black button on the R12DS, press the binding button 1 second and release, receiver light start blinking, after about blinking 8 times, match code success then receiver signal LED always on. 4. The antennas must be keep as straight as possible. Otherwise it will reduce the effective range. Specifications: Signal: SBUS,PWM Channel: PWM 12 channels, SBUS 12 channels Working Voltage: 4.8-10V Working Current: 38-45mA（input voltage: 5V） Size: 1.97*1.26*0.59in Weight: 0.5oz Package Included: R12DS receiver x 1
Make sure this fits by entering your model number.Stronger Anti-interference: DSSS&FHSS communication technology makes R12DS receiver with stable transmission signal, control distance up to 2.4 miles in the air. (Actually control range depends on the using environment)12 Channels: with standard SBUS/PWM signal output, high resolution ratio of 4096, fast Respone for all channels. Make sure SYSTEM CH seletion is 12CH mode when it works with AT9S/AT9S Pro transmitter, otherwise that will cannot work.Real-time Information: When works with PRM-03 module and flight controller APM/Pixhawk/Mini PIX, it provides vital information on Radiolink transmitter screen, like voltage, RSSI, flight mode, etc.Quick to Bind: Just press bind button over 1 second, no need any setting on transmitter when they are binding.Anti-polarity Protection: With reverse polarity protection circuit, won't damage the receiver even you plug wrong polarity. 4.6-10v DC, support high voltage servo.
상품설명
DSSS&FHSS reduce overall signal interference allow the R12DS to produce a highly constant and stable transmission signal. Please Note: 1. R12DS only work with Radiolink transmitter products: AT9S Pro, AT9S, AT9,AT10,AT10II. 2. Short push the ID set switch 2 times within 1 second it can change signal, while the LED change to red, it indicates PWM signal output, the blue/purple LED indicates SBUS signal output. 3. Please make sure your Radio's alway 12CH, go to your radio MENU—SYSTEM—CH-SELECT: 12CH How to Match Code With Transmitter: 1. Put the transmitter and the receiver close to each other within 50 cm. 2. Turn on the transmitter and R12DS. 3. There is a black button on the R12DS, press the binding button 1 second and release, receiver light start blinking, after about blinking 8 times, match code success then receiver signal LED always on. 4. The antennas must be keep as straight as possible. Otherwise it will reduce the effective range. Specifications: Signal: SBUS,PWM Channel: PWM 12 channels, SBUS 12 channels Working Voltage: 4.8-10V Working Current: 38-45mA（input voltage: 5V） Size: 1.97*1.26*0.59in Weight: 0.5oz Package Included: R12DS receiver x 1
2021-04-20 13:10:23
