CLD-100 CFCs HCFCs HFCs Refrigerant Halogen Leak Detector Gas Air HVAC Tester Freon Leak Detector R134a R410a R22a Air Condition
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Detect all kind of halogen refrigerants.Sensitivity can be adjusted at any time and the detector can be adjusted automatically to the best state of detection.Inner precise IC with ultra-low circuit consumption offer more stable function and lengthens battery life.Dual-color visual display of battery voltage.Excellent sensor brings high sensitivity and long service time.
상품설명
FAQ: Q1: Can this detector detect leaks in R12a? A1: The device detects R12 not R12a. Q2: What it the sensor life on this detector? A2: The sensor's life is about 25 hours (also depends on the operating environment ). Q3: How many batteries does it need? A3: This device needs 4 x AAA batteries. The battery box can be taken out and you will see another 2 at the back of it. Q4: Why does the detector beep immediately when I turn it on? A4: When turn on the detector it will beep regularly at a slow frequency. If leak detected, it will beep in a higher frequency. Technical parameters: 1.Operating temperature: 0℃-52℃(30°F to 125°F); 2.Maximum sensitivity: 6 g/yr, for all halogenated refrigerants; 3.Battery life: approximately 20 hours of normal use; 4.Response time: Instantaneous; 5.Work mode: continuous, no limitation; 6.Fixed probe length: 7.8 inch; 7.Dimensions:9*2.55*2.55(inch); 8.Warm-up time: approximately 6 seconds; 9.Reset time: 2 to 10 seconds; 10. Power Supply: 6 V DC, 4 x AAA Batteries The CLD-100 may also be used to detect leaks in other systems and storage/recovery containers.It will respond to all halogenated (including Chlorine and Fluorine) refrigerants. This includes but not limited to: CFCs e.g.R12,R11,R500,R503 etc. HCFCs e.g.R22,R123,R124,R502 etc. HFCs e.g.R134a,R404a,R125 etc. Blends such as AZ-50, HP62, MP39 etc. 1 x Halogen Leak Detector 1x Instruction
Make sure this fits by entering your model number.Detect all kind of halogen refrigerants.Sensitivity can be adjusted at any time and the detector can be adjusted automatically to the best state of detection.Inner precise IC with ultra-low circuit consumption offer more stable function and lengthens battery life.Dual-color visual display of battery voltage.Excellent sensor brings high sensitivity and long service time.
상품설명
FAQ: Q1: Can this detector detect leaks in R12a? A1: The device detects R12 not R12a. Q2: What it the sensor life on this detector? A2: The sensor's life is about 25 hours (also depends on the operating environment ). Q3: How many batteries does it need? A3: This device needs 4 x AAA batteries. The battery box can be taken out and you will see another 2 at the back of it. Q4: Why does the detector beep immediately when I turn it on? A4: When turn on the detector it will beep regularly at a slow frequency. If leak detected, it will beep in a higher frequency. Technical parameters: 1.Operating temperature: 0℃-52℃(30°F to 125°F); 2.Maximum sensitivity: 6 g/yr, for all halogenated refrigerants; 3.Battery life: approximately 20 hours of normal use; 4.Response time: Instantaneous; 5.Work mode: continuous, no limitation; 6.Fixed probe length: 7.8 inch; 7.Dimensions:9*2.55*2.55(inch); 8.Warm-up time: approximately 6 seconds; 9.Reset time: 2 to 10 seconds; 10. Power Supply: 6 V DC, 4 x AAA Batteries The CLD-100 may also be used to detect leaks in other systems and storage/recovery containers.It will respond to all halogenated (including Chlorine and Fluorine) refrigerants. This includes but not limited to: CFCs e.g.R12,R11,R500,R503 etc. HCFCs e.g.R22,R123,R124,R502 etc. HFCs e.g.R134a,R404a,R125 etc. Blends such as AZ-50, HP62, MP39 etc. 1 x Halogen Leak Detector 1x Instruction
2019-05-01 08:31:30