DasMarine 3 Step Ladder Under Platform Sliding Ladder Stainless Steel 316 Spring Loaded Latch with a Carry Handle (3 Step Ladder)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Designed for under platform use - stows easily and compactly with spring loaded latch and a carry handle for easy fold and unfoldConstructed of marine grade 316 stainless steel and have a proofload to support even the biggest swimmer. Each step has a slip-proof plastic tread to assure maximum safety.This boat ladder is designed to be mounted below your swim grid or other platform. When stowed, it folds flat beneath your swim grid/platform. This leaves your swim grid completely unobstructed, yet the ladder can easily fold out at your convenienceDimensions: Length Folded 16", Length Extended 33.5", Width (Outside of Bracket) 11.5", Proof Load 1190 lbs.Package Included: 1 x 3 step ladder, 8x Screws,instructions are inlcuded (The diameter of the hole for screw is about 8mm/0.31inch)
상품설명
Features: Designed for under platform use - stows easily and compactly Ideal for installations under swim platforms or under the deck on bow or side of pontoon boats Ladder stows compactly within its own length Spring loaded self-locking for stowage No More dealing with Velcro Straps, Bungee Cords, and Rubber Straps Carry handle for easy fold and unfold Flat poly treads for increased comfort 316 stainless steel - rated to 1190 lbs. Specifications: L deployed: 33.5" (85cm) L stowed: 16" (41cm) Overall height: 3" (8cm) W: 11.5" (29cm). Support frame L 14.75" (37cm) W 13.75" (35cm) Four 3/8" mount holes on each side How To Mount 1. Choose the most suitable side of your transom platform for mounting the ladder. 2. When mounting, locate a place where the ladder will not interfere with the turning of the motor or be near the propeller of your craft. 3. Position the mounting bracket with the ladder in the area to be attached. 4.Mark the bracket’s eight mounting holes onto the deck surface. 5.Drill the eight marked holes with a suitable drill bit. NOTE: It is recommended to through-bolt this ladder for a secure installation 6. Mount the ladder in place by holding bracket up to platform and inserting mounting screws. Secure ladder in place with fasteners (not provided, as installations vary). Safety Guildlines No jumping or diving! Do not use when motor is running This ladder designed for boat use only Face ladder when entering boat or water Only one person on ladder at a time Check all steps and hardware before using Never operate your boat with the ladder in “down” position. Serious injury, or damage to your boat or ladder may result.
Make sure this fits by entering your model number.Designed for under platform use - stows easily and compactly with spring loaded latch and a carry handle for easy fold and unfoldConstructed of marine grade 316 stainless steel and have a proofload to support even the biggest swimmer. Each step has a slip-proof plastic tread to assure maximum safety.This boat ladder is designed to be mounted below your swim grid or other platform. When stowed, it folds flat beneath your swim grid/platform. This leaves your swim grid completely unobstructed, yet the ladder can easily fold out at your convenienceDimensions: Length Folded 16", Length Extended 33.5", Width (Outside of Bracket) 11.5", Proof Load 1190 lbs.Package Included: 1 x 3 step ladder, 8x Screws,instructions are inlcuded (The diameter of the hole for screw is about 8mm/0.31inch)
상품설명
Features: Designed for under platform use - stows easily and compactly Ideal for installations under swim platforms or under the deck on bow or side of pontoon boats Ladder stows compactly within its own length Spring loaded self-locking for stowage No More dealing with Velcro Straps, Bungee Cords, and Rubber Straps Carry handle for easy fold and unfold Flat poly treads for increased comfort 316 stainless steel - rated to 1190 lbs. Specifications: L deployed: 33.5" (85cm) L stowed: 16" (41cm) Overall height: 3" (8cm) W: 11.5" (29cm). Support frame L 14.75" (37cm) W 13.75" (35cm) Four 3/8" mount holes on each side How To Mount 1. Choose the most suitable side of your transom platform for mounting the ladder. 2. When mounting, locate a place where the ladder will not interfere with the turning of the motor or be near the propeller of your craft. 3. Position the mounting bracket with the ladder in the area to be attached. 4.Mark the bracket’s eight mounting holes onto the deck surface. 5.Drill the eight marked holes with a suitable drill bit. NOTE: It is recommended to through-bolt this ladder for a secure installation 6. Mount the ladder in place by holding bracket up to platform and inserting mounting screws. Secure ladder in place with fasteners (not provided, as installations vary). Safety Guildlines No jumping or diving! Do not use when motor is running This ladder designed for boat use only Face ladder when entering boat or water Only one person on ladder at a time Check all steps and hardware before using Never operate your boat with the ladder in “down” position. Serious injury, or damage to your boat or ladder may result.
2019-12-25 08:45:05