KwikSafety TORNADO Safety Harness 1 D-Ring Fall Protection | 1 Pack, 2 Pack, Combo, Kit, Case Pack, Assembly
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
PolyesterImportedFALL PROTECTION COMBO - The KwikSafety TORNADO Fall Protection Kit is the ultimate bang for your buck, high value PPE products all bundled into one! Each Kit comes with a: 1D TORNADO Safety Harness, 6’ RATTLER Safety Lanyard, and a 10 lb Tool Lanyard. Truly the perfect Construction / Roofing / Roofer tool kit for a great value.ANSI COMPLIANT - All of the items in the TORNADO COMBO are ANSI/ASSE and OSHA compliant, A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.SAFETY HARNESS - The KwikSafety TORNADO Full Body 1D Ring Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.SAFETY LANYARD - The internal shock-absorbing lanyard makes the RATTLER a more lightweight fall protection device. The dual-action, double-locking snap hooks prevent accidental rollout while remaining easy to latch on to your anchor point. The RATTLER has a 310 lb max capacity and the tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds.TOOL LANYARD | The TENTACLE tool lanyard is designed for light duty uses, namely hand tools and smaller power tools. The lanyard has a durable bungee strap with a cord stopper with a durable rubber base to secure tools. The anodized aluminum carabiner (does not rust!) is an easy quick snap clip. The TENTACLE is third party tested to a max capacity of 10 lbs, resting length is 3ft and activated length is about 4 ft.
상품설명
Our OSHA Approved and ANSI Compliant KwikSafety High Quality Fall Protection Safety Harness (Universal Arnes de seguridad) is for any industry and any application. It has 1 ¾ -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. Easily connect the front, side, and back straps with a pass-through buckle. A Single (1) metal Dorsal Ring is located on the back of the Full Body Harness (arneses para construcción, arnes para roofing) and is used as the primary fall arrester attachment. D-rings located on the hips of a safety harness (arnes seguridad) are for work positioning uses ONLY. Hip rings are NOT used for fall protection but for maneuverability in job types including arborists, utility workers climbing poles, construction workers tying rebar or operating in a suspended lift or boom. Water repellent safety webbing ergonomically supports back and hips, making the harness comfortable while bearing the weight of the user as well as the weight of tools that may be attached. Our harness protection is available in a pack combo or kit. Our KwikSafety Full Body Harness is One Size Fits Most and fits a men\'s and women\'s height range of 4’10” to 6’6”; and a weight range of 130 lbs. to 310lbs. Here at KwikSafety craftsmanship, care and pride is taken with a critical eye when it comes to our products and to the workers safety. Our KwikSafety D Ring Safety Harness exceeds all applicable industry standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities. If you happened to order the wrong size or item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!
PolyesterImportedFALL PROTECTION COMBO - The KwikSafety TORNADO Fall Protection Kit is the ultimate bang for your buck, high value PPE products all bundled into one! Each Kit comes with a: 1D TORNADO Safety Harness, 6’ RATTLER Safety Lanyard, and a 10 lb Tool Lanyard. Truly the perfect Construction / Roofing / Roofer tool kit for a great value.ANSI COMPLIANT - All of the items in the TORNADO COMBO are ANSI/ASSE and OSHA compliant, A personal fall arrest system is required when working 6ft. or more above lower levels & usually consist of a full body harness, a declaration device, a lanyard and a an anchor point. Construction, Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue.SAFETY HARNESS - The KwikSafety TORNADO Full Body 1D Ring Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area.SAFETY LANYARD - The internal shock-absorbing lanyard makes the RATTLER a more lightweight fall protection device. The dual-action, double-locking snap hooks prevent accidental rollout while remaining easy to latch on to your anchor point. The RATTLER has a 310 lb max capacity and the tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds.TOOL LANYARD | The TENTACLE tool lanyard is designed for light duty uses, namely hand tools and smaller power tools. The lanyard has a durable bungee strap with a cord stopper with a durable rubber base to secure tools. The anodized aluminum carabiner (does not rust!) is an easy quick snap clip. The TENTACLE is third party tested to a max capacity of 10 lbs, resting length is 3ft and activated length is about 4 ft.
상품설명
Our OSHA Approved and ANSI Compliant KwikSafety High Quality Fall Protection Safety Harness (Universal Arnes de seguridad) is for any industry and any application. It has 1 ¾ -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. Easily connect the front, side, and back straps with a pass-through buckle. A Single (1) metal Dorsal Ring is located on the back of the Full Body Harness (arneses para construcción, arnes para roofing) and is used as the primary fall arrester attachment. D-rings located on the hips of a safety harness (arnes seguridad) are for work positioning uses ONLY. Hip rings are NOT used for fall protection but for maneuverability in job types including arborists, utility workers climbing poles, construction workers tying rebar or operating in a suspended lift or boom. Water repellent safety webbing ergonomically supports back and hips, making the harness comfortable while bearing the weight of the user as well as the weight of tools that may be attached. Our harness protection is available in a pack combo or kit. Our KwikSafety Full Body Harness is One Size Fits Most and fits a men\'s and women\'s height range of 4’10” to 6’6”; and a weight range of 130 lbs. to 310lbs. Here at KwikSafety craftsmanship, care and pride is taken with a critical eye when it comes to our products and to the workers safety. Our KwikSafety D Ring Safety Harness exceeds all applicable industry standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities. If you happened to order the wrong size or item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!
2022-05-03 15:28:55