NMEA 2000 to USB Gateway (DeviceNet Connector w/Male USB)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
can pass any message (including proprietary) between NMEA 2000 and a PC application in N2K and RAW modes;In 0183 mode, provides compatibility with very old Marine applications;allows to control Ray marine Sea Talk NG autopilots from NMEA 0183;Is compatible with NMEA 2000, J1939 and Volvo Pentad EVC Networks;Provides High-Voltage galvanic isolation between NMEA 2000 and USB interfaces;
상품설명
NMEA 2000 USB Gateway YDNU-02 The gateway allows you to see data from a NMEA 2000 marine digital network on a PC, laptop or tablet PC with Microsoft Windows, Mac OS or Linux. With it, you get marine network data including vessel course, speed, position, wind speed and direction, water depth, AIS messages from vessels and aircrafts and other navigation data in PC applications like OpenCPN, Expedition, Coastal Explorer, Polar View, Open Skipper, etc. The device works as a bi-directional gateway so it is also possible to send messages from PC applications to the NMEA 2000 network. That allows, for example, sending of AIS data from a PC USB receiver to a chart plotter, as well as control over the autopilot and the vessel\'s other equipment. It also supports using a PC as an 0183 to NMEA 2000 converter if you have some NMEA 0183 equipment connected to one of the other PC ports. The Device does not require any special software. You can select the preferred operation mode or initiate recording of diagnostics data using an operation system command line. To update the firmware, you just need to send an update file to the Device\'s port with a "copy" (MS-DOS and Microsoft Windows) or "cp" (Linux and Mac OS X) command. With any terminal program, you can get access to a service menu, where you can configure filters for received and transmitted messages and tune some other settings.
can pass any message (including proprietary) between NMEA 2000 and a PC application in N2K and RAW modes;In 0183 mode, provides compatibility with very old Marine applications;allows to control Ray marine Sea Talk NG autopilots from NMEA 0183;Is compatible with NMEA 2000, J1939 and Volvo Pentad EVC Networks;Provides High-Voltage galvanic isolation between NMEA 2000 and USB interfaces;
상품설명
NMEA 2000 USB Gateway YDNU-02 The gateway allows you to see data from a NMEA 2000 marine digital network on a PC, laptop or tablet PC with Microsoft Windows, Mac OS or Linux. With it, you get marine network data including vessel course, speed, position, wind speed and direction, water depth, AIS messages from vessels and aircrafts and other navigation data in PC applications like OpenCPN, Expedition, Coastal Explorer, Polar View, Open Skipper, etc. The device works as a bi-directional gateway so it is also possible to send messages from PC applications to the NMEA 2000 network. That allows, for example, sending of AIS data from a PC USB receiver to a chart plotter, as well as control over the autopilot and the vessel\'s other equipment. It also supports using a PC as an 0183 to NMEA 2000 converter if you have some NMEA 0183 equipment connected to one of the other PC ports. The Device does not require any special software. You can select the preferred operation mode or initiate recording of diagnostics data using an operation system command line. To update the firmware, you just need to send an update file to the Device\'s port with a "copy" (MS-DOS and Microsoft Windows) or "cp" (Linux and Mac OS X) command. With any terminal program, you can get access to a service menu, where you can configure filters for received and transmitted messages and tune some other settings.
2019-03-13 12:13:15
