FenglinTech Worker 1Pair NdFeB Sintered Double Ball Motor for Nerf Stryfe/Nerf Rapidstrike CS-18/Worker Swordfish
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
✔ Suitable for Nerf Stryfe/Nerf Rapidstrike CS-18/Worker Swordfish; Super magnetic blocking torque up to 1520g-cmc, double ball bearing reduces friction, quick start, high efficiency operation. The sound is crisp and delicate, eliminating the irritating squeak and able to withstand continuous launch without reducing the initial velocity.✔ Attention 1 - When using the fully automatic kit + sintering motor, please follow the tutorial plus the FET/motor governor, otherwise it may burn out the micro switch or motor. The motor should be handled with care, and if it falls or falls too much, it may damage the motor✔ Attention 2 - The battery cannot use lithium iron phosphate battery (explosion may occur due to use), and only lithium polymer batteries can be used. The voltage is recommended to use 11.1V, the battery discharge capacity is 25C-60C. Never put it in an open flame or expose it to the sun. The motor can\'t be blocked, the danger of burning the motor is blocked, and the battery may explode.✔ Attention 3 - Distribution gasket function: Since the motor is a double ball motor, the ball washer on the motor will protrude slightly less than the ordinary motor, so that the groove of the flywheel and the ballistic concentric shaft of the bin are not level, the accuracy will be biased; after adding the gasket Avoid this phenomenon, so that the groove of the flywheel is flush with the concentric axis of the flywheel bin✔ Package Content - 2 x Motor, 2 x Plastic Gasket, 1 x Wire, 1 x Tips
상품설명
FenglinTech Worker 1Pair NdFeB Sintered Double Ball Motor for Nerf Stryfe/Nerf Rapidstrike CS-18/Worker Swordfish
✔ Suitable for Nerf Stryfe/Nerf Rapidstrike CS-18/Worker Swordfish; Super magnetic blocking torque up to 1520g-cmc, double ball bearing reduces friction, quick start, high efficiency operation. The sound is crisp and delicate, eliminating the irritating squeak and able to withstand continuous launch without reducing the initial velocity.✔ Attention 1 - When using the fully automatic kit + sintering motor, please follow the tutorial plus the FET/motor governor, otherwise it may burn out the micro switch or motor. The motor should be handled with care, and if it falls or falls too much, it may damage the motor✔ Attention 2 - The battery cannot use lithium iron phosphate battery (explosion may occur due to use), and only lithium polymer batteries can be used. The voltage is recommended to use 11.1V, the battery discharge capacity is 25C-60C. Never put it in an open flame or expose it to the sun. The motor can\'t be blocked, the danger of burning the motor is blocked, and the battery may explode.✔ Attention 3 - Distribution gasket function: Since the motor is a double ball motor, the ball washer on the motor will protrude slightly less than the ordinary motor, so that the groove of the flywheel and the ballistic concentric shaft of the bin are not level, the accuracy will be biased; after adding the gasket Avoid this phenomenon, so that the groove of the flywheel is flush with the concentric axis of the flywheel bin✔ Package Content - 2 x Motor, 2 x Plastic Gasket, 1 x Wire, 1 x Tips
상품설명
FenglinTech Worker 1Pair NdFeB Sintered Double Ball Motor for Nerf Stryfe/Nerf Rapidstrike CS-18/Worker Swordfish
2019-10-11 16:42:18
