Premium Quality Rebar Tier Tying Machine Automatic Steel Bar Rod Tying Binding Tool Handheld Electric Tying Tools 8-34mm Tying Range
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Rebar Tier is a hand held machine used to pack rebars quickly, It can save 3-5 times than man power by hand.The Tying Machine is used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.Applicable Scope Of Steel Strapping: 8mm - 34mm, Knot Wire Length: 300 - 500mmPackage list: 1X Tying Machine, 1X Pliers, 1X Charger,1X Storage Box, 2X Lithium Ion Batteries, 2X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)
상품설명
Specifications Voltage: 21V Battery: Lithium Ion Batteries Battery Capacity: 6600 Mah Battery Charging Time: 1.5 hours full filling Tying Wire Diameter: 0.8mm Tying Wire Length: more than 110 m Applicable Scope Of Steel Strapping: 8mm - 34mm Knot Wire Length: 300 - 500mm Knot Number Per Charge: 1500 times Knot The Required Time: 0.8 seconds at a time Machine Size: 285 mm * 64 mm * 220 mm / 11.22\'\'x2.52\'\'x8.66\'\'(appr.) Operation Instructions 1. The rebar tirer\'s jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles. Note: There can be no barrier between the mouth of the jaws and the wire. 2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off) Note: Press one button at a time, do not probe the jaws at work. 3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding. 4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding. Operating Skills 1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding. 2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly. Package included: 1X Tying Machine 1X Pliers 1X Charger 1X Storage Box 2X Lithium Ion Batteries 2X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)
Rebar Tier is a hand held machine used to pack rebars quickly, It can save 3-5 times than man power by hand.The Tying Machine is used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.Applicable Scope Of Steel Strapping: 8mm - 34mm, Knot Wire Length: 300 - 500mmPackage list: 1X Tying Machine, 1X Pliers, 1X Charger,1X Storage Box, 2X Lithium Ion Batteries, 2X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)
상품설명
Specifications Voltage: 21V Battery: Lithium Ion Batteries Battery Capacity: 6600 Mah Battery Charging Time: 1.5 hours full filling Tying Wire Diameter: 0.8mm Tying Wire Length: more than 110 m Applicable Scope Of Steel Strapping: 8mm - 34mm Knot Wire Length: 300 - 500mm Knot Number Per Charge: 1500 times Knot The Required Time: 0.8 seconds at a time Machine Size: 285 mm * 64 mm * 220 mm / 11.22\'\'x2.52\'\'x8.66\'\'(appr.) Operation Instructions 1. The rebar tirer\'s jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles. Note: There can be no barrier between the mouth of the jaws and the wire. 2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off) Note: Press one button at a time, do not probe the jaws at work. 3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding. 4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding. Operating Skills 1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding. 2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly. Package included: 1X Tying Machine 1X Pliers 1X Charger 1X Storage Box 2X Lithium Ion Batteries 2X Tying Wire (Tying Wire Standard: About 0.8 mm x 110 m/roll)
2019-03-07 19:56:15