660FT 1080P HDMI Wireless Extender Kit, NexTrend 5G HDMI Wireless Transmitter and Receiver -Loop Out-IR Remote Streaming Full HD 3D Video Audio from PC, Cable, Netflix, YouTube, Xbox to HDTV/Projector
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
[ SUPERIOR VIDEO AUDIO QUALITY ] Wirelessly stream true 1080p high definition 3D video & digital audio to your TV or projector. Watch movies & TV shows from your laptop, PC, Mac, A/V receiver, gaming console, cable/satellite. * Note: There’s a delay/latency time (0.5 seconds or less) due to data compression. Not recommended for real-time applications, such as PC gaming. [ INCREASE YOUR VIEWING RANGE ] Transmitted signal is crystal clear, able to stream HDMI A/V signals up to 660 feet (when no obstacles and interference with other signals) through line-of-sight environments, it works with most HDMI-equipped devices.[ PLUG & PLAY and EASY to SET ] Easy to install plug 'n play set up eliminates the need to install expensive, inconvenient cables. No software or WiFi connection required. We have added two physical buttons to switch High-Low Rate or Multi-Channels for different use. NOTE: Do NOT install multiple kits in the same location as it may cause signal interference.)[ 38KHZ IR TRANSMISSION ] The infrared transmission function allows you to control HDMI source device at a remote location. You are able to control the IPTV in your living room while you are comfortable sitting in your bedroom watching TV.[ 100% SATISFACTION ] NexTrend provide Risk-Free 12-Month Manufacturer Warranty and Lifetime technical support. If you have any questions or concerns with this product, please do not hesitate to contact us. We promise we would offer you the best solution and make you satisfied. THanks for your great support.
상품설명
5G 200m DUAL ANTENNA WIRELESS 1080P SPECIFICATIONS: HDMI resolution: up to 1080P@50/60Hz HDMI Audio Format: LPCM2.0/48KHz/16Bit Max bandwidth: 225MHz HDMI Max baud rate: 6.75Gbps Input/Output TMDS signal: 0.5~1.5Volts p-p(TTL) Input/Output DDC signal: 5Volts p-p (TTL) HDMI output cable distance: ≤12m AWG26 HDMI standard cable Antenna type: External dual 3dBi gain antenna Wireless standard: IEEE 802.11a/n Wireless Band: 5GHz ISM Band Max Data rates: 2T2R up to 300Mbps Transmit Output Power（IPEX）: 20dBm Max Transmission distance: up to 200m (in open space) IR Carrier frequency: 20-60KHz TX/RX Max working current: 1A Power adapter format Input: AC 100V～240V 50HZ/60Hz, DC5V/2A Operating Temperature range: -5 to +45℃ Case Dimension (L x W x H): 127.5x127.5x25 (mm) Weight : TX163g/RX160g HOW TO INSTALL: 1. Connect one HDMI cable from the DVD/BD player into the HDMI input port of the HDMI wireless TX 2. Connect one HDMI cable from TV/Monitor into the HDMI output port of the HDMI wireless RX 3. Connect the IR Transmitter cable to the HDMI wireless TX and the IR Transmitter cable must face to the control target device 4. Connect IR Receiver cable to the HDMI wireless RX 5. Connect 5V power supplies to the TX&RX, the POWER indicator will be lit at this moment 6. The device will automatically connect after power on. The STATUS indicator of TX and RX will be lit when the connection is successful. If the HDMI input or output signal is normal, the HDMI indicator light will be lit also. The STATUS indicator ashes continuously during normal transmiss
[ SUPERIOR VIDEO AUDIO QUALITY ] Wirelessly stream true 1080p high definition 3D video & digital audio to your TV or projector. Watch movies & TV shows from your laptop, PC, Mac, A/V receiver, gaming console, cable/satellite. * Note: There’s a delay/latency time (0.5 seconds or less) due to data compression. Not recommended for real-time applications, such as PC gaming. [ INCREASE YOUR VIEWING RANGE ] Transmitted signal is crystal clear, able to stream HDMI A/V signals up to 660 feet (when no obstacles and interference with other signals) through line-of-sight environments, it works with most HDMI-equipped devices.[ PLUG & PLAY and EASY to SET ] Easy to install plug 'n play set up eliminates the need to install expensive, inconvenient cables. No software or WiFi connection required. We have added two physical buttons to switch High-Low Rate or Multi-Channels for different use. NOTE: Do NOT install multiple kits in the same location as it may cause signal interference.)[ 38KHZ IR TRANSMISSION ] The infrared transmission function allows you to control HDMI source device at a remote location. You are able to control the IPTV in your living room while you are comfortable sitting in your bedroom watching TV.[ 100% SATISFACTION ] NexTrend provide Risk-Free 12-Month Manufacturer Warranty and Lifetime technical support. If you have any questions or concerns with this product, please do not hesitate to contact us. We promise we would offer you the best solution and make you satisfied. THanks for your great support.
상품설명
5G 200m DUAL ANTENNA WIRELESS 1080P SPECIFICATIONS: HDMI resolution: up to 1080P@50/60Hz HDMI Audio Format: LPCM2.0/48KHz/16Bit Max bandwidth: 225MHz HDMI Max baud rate: 6.75Gbps Input/Output TMDS signal: 0.5~1.5Volts p-p(TTL) Input/Output DDC signal: 5Volts p-p (TTL) HDMI output cable distance: ≤12m AWG26 HDMI standard cable Antenna type: External dual 3dBi gain antenna Wireless standard: IEEE 802.11a/n Wireless Band: 5GHz ISM Band Max Data rates: 2T2R up to 300Mbps Transmit Output Power（IPEX）: 20dBm Max Transmission distance: up to 200m (in open space) IR Carrier frequency: 20-60KHz TX/RX Max working current: 1A Power adapter format Input: AC 100V～240V 50HZ/60Hz, DC5V/2A Operating Temperature range: -5 to +45℃ Case Dimension (L x W x H): 127.5x127.5x25 (mm) Weight : TX163g/RX160g HOW TO INSTALL: 1. Connect one HDMI cable from the DVD/BD player into the HDMI input port of the HDMI wireless TX 2. Connect one HDMI cable from TV/Monitor into the HDMI output port of the HDMI wireless RX 3. Connect the IR Transmitter cable to the HDMI wireless TX and the IR Transmitter cable must face to the control target device 4. Connect IR Receiver cable to the HDMI wireless RX 5. Connect 5V power supplies to the TX&RX, the POWER indicator will be lit at this moment 6. The device will automatically connect after power on. The STATUS indicator of TX and RX will be lit when the connection is successful. If the HDMI input or output signal is normal, the HDMI indicator light will be lit also. The STATUS indicator ashes continuously during normal transmiss
2019-05-03 10:13:42
