DZS Elec Temperature Controller -50 to 110 Celsius (-58 to 230 F) DC 12V Programmable Heating/Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time. Can be used for cooling/heating control. Operating Voltage: DC12V 200mAMeasurement Range: -50 to 110 Celsius (-58 to 230 F), the C/F button allows you to switch between Celsius and Fahrenheit temperaturesClear Working State: the relay is closed when the light is on, and the relay is disconnected when the light is off. It has high temperature protection.With a waterproof NTC (10K 0.5%) temperature sensor probe, rogrammable heating/cooling mode, delay start, high temperature alarm, Celsius/Fahrenheit mode, etc.Can be used for fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems.
상품설명
Product Description: Product Name: Programmable Dual LED Display Temperature Controller Operating Voltage: DC12V 200mA Measurement Range: -50 to 110 Celsius (-58 to 230 F) Elaboration Precision: +/-0.1 Celsius Control Precision: 0.1 Celsius Backlash Precision: 0.1 Celsius Refresh Rate: 0.5s High Temperature Protection: 0 to 60 Celsius (32 to 230 F) Temperature Sensor Type: 10K 0.5% NTC Operating Temperature: -10 to 60 Celsius (14 to 140 F) Compatible Load: 5A / 15A 220VAC; 20A 14VDC Power Consumption: Less than and equal to 35mA (Static), Less than and equal to 65mA (relay closure) Module Size: 48x29x32mm / 1.89x1.14x1.26 inch (LxWxH) Temperature Setting: Press STC key and the LED will flash. Press STC (+) and C/F (-) key to reach the set temperature value, wait for 3s, and the module will automatically save the parameters and exit. Indicator: Lights on, relay closed; Lights out, relay disconnected. LED Display: Red: Measuring Temperature; Blue: Setting Temperature LL: Means the sensor is open HH: Indicates that the temperature exceeds the measurement range of the module --: Indicates that the module is under high temperature protection Programmable Thermostat Introductions (Code, Explain, Setting range, Factory setting): P0, Heating/Cooling, H/C, C P1, Return difference, 0.1-30, 2 P2, Set limit maximum, +110, 110 P3, Set limit minimun, -50, -50 P4, Temperature correction, -15 - +15, 0 P5, Delay start, 0-10, 0 P6, High temperature alarm, -50 - +110, OFF P7, Celsius/Fahrenheit, CS/FH, CS P8, Factory reset, ON-OFF, OFF Package Content: 1pc Temperature monitoring controller 1pc operating manual
Make sure this fits by entering your model number.Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time. Can be used for cooling/heating control. Operating Voltage: DC12V 200mAMeasurement Range: -50 to 110 Celsius (-58 to 230 F), the C/F button allows you to switch between Celsius and Fahrenheit temperaturesClear Working State: the relay is closed when the light is on, and the relay is disconnected when the light is off. It has high temperature protection.With a waterproof NTC (10K 0.5%) temperature sensor probe, rogrammable heating/cooling mode, delay start, high temperature alarm, Celsius/Fahrenheit mode, etc.Can be used for fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems.
상품설명
Product Description: Product Name: Programmable Dual LED Display Temperature Controller Operating Voltage: DC12V 200mA Measurement Range: -50 to 110 Celsius (-58 to 230 F) Elaboration Precision: +/-0.1 Celsius Control Precision: 0.1 Celsius Backlash Precision: 0.1 Celsius Refresh Rate: 0.5s High Temperature Protection: 0 to 60 Celsius (32 to 230 F) Temperature Sensor Type: 10K 0.5% NTC Operating Temperature: -10 to 60 Celsius (14 to 140 F) Compatible Load: 5A / 15A 220VAC; 20A 14VDC Power Consumption: Less than and equal to 35mA (Static), Less than and equal to 65mA (relay closure) Module Size: 48x29x32mm / 1.89x1.14x1.26 inch (LxWxH) Temperature Setting: Press STC key and the LED will flash. Press STC (+) and C/F (-) key to reach the set temperature value, wait for 3s, and the module will automatically save the parameters and exit. Indicator: Lights on, relay closed; Lights out, relay disconnected. LED Display: Red: Measuring Temperature; Blue: Setting Temperature LL: Means the sensor is open HH: Indicates that the temperature exceeds the measurement range of the module --: Indicates that the module is under high temperature protection Programmable Thermostat Introductions (Code, Explain, Setting range, Factory setting): P0, Heating/Cooling, H/C, C P1, Return difference, 0.1-30, 2 P2, Set limit maximum, +110, 110 P3, Set limit minimun, -50, -50 P4, Temperature correction, -15 - +15, 0 P5, Delay start, 0-10, 0 P6, High temperature alarm, -50 - +110, OFF P7, Celsius/Fahrenheit, CS/FH, CS P8, Factory reset, ON-OFF, OFF Package Content: 1pc Temperature monitoring controller 1pc operating manual
2022-04-05 09:11:37
