Anmbest 10PCS KY-040 5V 20 Pulses/Circle Incremental 360 Degree Rotary Encoder Module with Knob Cap for Arduino Raspberry Pi
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Type: Incremental Rotary Encoder; Operating voltage: 5V; Pulses/circle: 20; Size: 32 x 19 x 30mm/1.26 x0.75 x 1.18inch.This rotary encoder can be counted by rotating forward and reverse direction during rotation of the output pulse frequency. Using the buttons on the rotary encoder it can be reset to its initial state to start counting from 0.The knob which we rotate is internally connected to the disk. If we rotate clockwise or counter-clockwise it will move accordingly. There are two contact point placed at a specific distance apart which are nothing but our CLOCK and DATA line.An incremental encoder will immediately report changes in position(Clockwise & Counterclockwise), which is an essential capability in some applications. However, it does not report or keeps track of absolute position. As a result, the mechanical system monitored by an incremental encoder may have to be moved to a fixed reference point to initialize the position measurement.Applications: Industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers, and rotating radar platforms.
상품설명
A rotary encoder, also called a shaft encoder, is an electro-mechanical device that converts the angular position or motion of a shaft or axle to digital output signals. Rotary encoders are used in a wide range of applications that require monitoring or control, or both, of mechanical systems, including industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers, and rotating radar platforms. Specifications: Type: Incremental Rotary Encoder Push Button Shaft Operating voltage: 5V Pulses/circle: 20 Shaft diameter: 6mm/0.24inch NOT THREADED! This product is a half shaft shank encoder Size: 32 x 19 x 30mm/1.26 x0.75 x 1.18inch CONNECTIONS "GND" : ground terminal "+" : 5V power supply "SW" : 'Select' switch (activated when shaft pressed on top) "DT" : Encoder Pin B "CLK" : Encoder Pin A Package Included: 10×Rotary Encoder Module 10×Orange Knob Cap
Make sure this fits by entering your model number.Type: Incremental Rotary Encoder; Operating voltage: 5V; Pulses/circle: 20; Size: 32 x 19 x 30mm/1.26 x0.75 x 1.18inch.This rotary encoder can be counted by rotating forward and reverse direction during rotation of the output pulse frequency. Using the buttons on the rotary encoder it can be reset to its initial state to start counting from 0.The knob which we rotate is internally connected to the disk. If we rotate clockwise or counter-clockwise it will move accordingly. There are two contact point placed at a specific distance apart which are nothing but our CLOCK and DATA line.An incremental encoder will immediately report changes in position(Clockwise & Counterclockwise), which is an essential capability in some applications. However, it does not report or keeps track of absolute position. As a result, the mechanical system monitored by an incremental encoder may have to be moved to a fixed reference point to initialize the position measurement.Applications: Industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers, and rotating radar platforms.
상품설명
A rotary encoder, also called a shaft encoder, is an electro-mechanical device that converts the angular position or motion of a shaft or axle to digital output signals. Rotary encoders are used in a wide range of applications that require monitoring or control, or both, of mechanical systems, including industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers, and rotating radar platforms. Specifications: Type: Incremental Rotary Encoder Push Button Shaft Operating voltage: 5V Pulses/circle: 20 Shaft diameter: 6mm/0.24inch NOT THREADED! This product is a half shaft shank encoder Size: 32 x 19 x 30mm/1.26 x0.75 x 1.18inch CONNECTIONS "GND" : ground terminal "+" : 5V power supply "SW" : 'Select' switch (activated when shaft pressed on top) "DT" : Encoder Pin B "CLK" : Encoder Pin A Package Included: 10×Rotary Encoder Module 10×Orange Knob Cap
2019-03-31 06:10:56
