Mediasonic Raid USB 3.1 Type C 4 Bay 3.5” SATA Hard Drive Enclosure with USB 3.1 Hub Feature – USB 3.1 Gen 2 10Gbps (HFR7-SU31CH)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Hardware embedded raid controller built-in on board with one-button control, support Single Drive Mode, Raid 0 / 1.Built-In USB Hub provides easy access to additional USB Type A and USB Type C connection for expansionTransfer rate up to 10Gbps via USB 3.1 Gen 2. USB-C to USB -C with E-Mark IC cable is included. (3.3ft)Support 3.5” SATA I / II / III hard disk drive up to 16TB per drive, and 2.5” SATA SSD / HDDSupport UASP, S.M.A.R.T, Smart Fan, and Power On / Off in synchronization with computer (Does not support auto Power-On due to power failure)
상품설명
Hard Disk Drive Support 3.5-inch SATA I / II / III hard disk drive up to 16TB per drive 2.5 inch SATA I / II / III hard disk drive up to 10TB per drive (bracket adapter required, not included in the package, search Amazon ASIN: B073R51B3Y) Support hard drive transfer rate up to 6.0Gbps. Interface Support USB Type C connection transfer rate up to 10.0Gbps via USB 3.1 Gen 2 USB Hub Features USB Type A Female Connection: USB 3.1 Gen 1 5.0Gbps can support Flash Drive, USB Card Reader, single bay external hard drive, charge smartphones, keyboard / mouse receivers, Bluetooth adapters, USB Fan, and USB LED light, etc. Power Output: 5V / 1A USB Type C Female Connection: USB 3.1 Gen 2 10Gbps can support flash drive, card reader, single bay external hard drive, and charge smartphones, etc. Power Output: 5V / 3A RAID Mode Features Single Mode: Computer will show up as four independent drives JBOD Mode: Raid 0 Spanning mode. Raid 0 (Stripping Mode) Raid 1 (Mirroring Mode) Please check user manual for all possible configuration Note: Mediasonic strongly recommend user to install same capacity / model / brand of hard drive if you are using Raid feature. Initial raid set up will erase all the hard drive content please back up your hard drive before the set-up. Supporting Operating System Window 7 / 8 / 10 (32 bit and 64bit) Mac OSX 10.12 or later Package Content HFR7-SU31CH x 1 USB 3.1 Type C to Type C Cable with E-Mark IC x 1 User Manual x 1 Power Adapter x 1 and Power Cord x 1 Hard Drive Handle x 4 and Hard Drive Screws x8 Screw Driver x 1 Technical Support and Warranty Service support@mediasonicusa.com Warranty Period 2 Year Warranty from Mediasonic Store
Make sure this fits by entering your model number.Hardware embedded raid controller built-in on board with one-button control, support Single Drive Mode, Raid 0 / 1.Built-In USB Hub provides easy access to additional USB Type A and USB Type C connection for expansionTransfer rate up to 10Gbps via USB 3.1 Gen 2. USB-C to USB -C with E-Mark IC cable is included. (3.3ft)Support 3.5” SATA I / II / III hard disk drive up to 16TB per drive, and 2.5” SATA SSD / HDDSupport UASP, S.M.A.R.T, Smart Fan, and Power On / Off in synchronization with computer (Does not support auto Power-On due to power failure)
상품설명
Hard Disk Drive Support 3.5-inch SATA I / II / III hard disk drive up to 16TB per drive 2.5 inch SATA I / II / III hard disk drive up to 10TB per drive (bracket adapter required, not included in the package, search Amazon ASIN: B073R51B3Y) Support hard drive transfer rate up to 6.0Gbps. Interface Support USB Type C connection transfer rate up to 10.0Gbps via USB 3.1 Gen 2 USB Hub Features USB Type A Female Connection: USB 3.1 Gen 1 5.0Gbps can support Flash Drive, USB Card Reader, single bay external hard drive, charge smartphones, keyboard / mouse receivers, Bluetooth adapters, USB Fan, and USB LED light, etc. Power Output: 5V / 1A USB Type C Female Connection: USB 3.1 Gen 2 10Gbps can support flash drive, card reader, single bay external hard drive, and charge smartphones, etc. Power Output: 5V / 3A RAID Mode Features Single Mode: Computer will show up as four independent drives JBOD Mode: Raid 0 Spanning mode. Raid 0 (Stripping Mode) Raid 1 (Mirroring Mode) Please check user manual for all possible configuration Note: Mediasonic strongly recommend user to install same capacity / model / brand of hard drive if you are using Raid feature. Initial raid set up will erase all the hard drive content please back up your hard drive before the set-up. Supporting Operating System Window 7 / 8 / 10 (32 bit and 64bit) Mac OSX 10.12 or later Package Content HFR7-SU31CH x 1 USB 3.1 Type C to Type C Cable with E-Mark IC x 1 User Manual x 1 Power Adapter x 1 and Power Cord x 1 Hard Drive Handle x 4 and Hard Drive Screws x8 Screw Driver x 1 Technical Support and Warranty Service support@mediasonicusa.com Warranty Period 2 Year Warranty from Mediasonic Store
2019-03-26 18:23:19
