M12 Lens Set, Arducam Lens for Raspberry Pi Camera (1/4") and Arduino, Telephoto, Macro, Wide Angle, Fisheye Lens Kit (10°- 200°) with M12 Lens Holder and Cleaning Cloth, Optical All-in-One
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Why we need it: In case you’re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image – like how wide and how close it is - we selected, tested and labeled a bunch of lenses and shrinks it all into a complete toolbox on your palmWhat’s in it: This kit includes 10 M12 Lenses to cover almost any angles of view you’ll ever need, 10°/20°/40°/60°/80°/100°/120°/140°/160°/200° respectively on a 1/4” Pi Camera like OV5647 and IMX219. M12 lens holders, screws, specifications and even cleaning cloth are also in the boxWhat else is needed: It makes a perfect combo with “Arducam B0031”, a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can’t use this kit directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is requiredHow to use it: Get a camera with an M12 lens holder, and screw one lens slowly into the M12 lens holder until you see a clear and sharp image on a video screen. Screw it out a little if you want to shoot objects close to the camera. Replace it with the next if it is not the best. Video: youtu.be/23jE0l8PTKANOTE: The 4 lens holders included come with 18mm/20mm hole spacing and 7mm/13mm heights. Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all. Arducam CS Mount Cameras also work with this kit with holders replaced
Make sure this fits by entering your model number.Why we need it: In case you’re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image – like how wide and how close it is - we selected, tested and labeled a bunch of lenses and shrinks it all into a complete toolbox on your palmWhat’s in it: This kit includes 10 M12 Lenses to cover almost any angles of view you’ll ever need, 10°/20°/40°/60°/80°/100°/120°/140°/160°/200° respectively on a 1/4” Pi Camera like OV5647 and IMX219. M12 lens holders, screws, specifications and even cleaning cloth are also in the boxWhat else is needed: It makes a perfect combo with “Arducam B0031”, a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can’t use this kit directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is requiredHow to use it: Get a camera with an M12 lens holder, and screw one lens slowly into the M12 lens holder until you see a clear and sharp image on a video screen. Screw it out a little if you want to shoot objects close to the camera. Replace it with the next if it is not the best. Video: youtu.be/23jE0l8PTKANOTE: The 4 lens holders included come with 18mm/20mm hole spacing and 7mm/13mm heights. Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all. Arducam CS Mount Cameras also work with this kit with holders replaced
2020-07-19 13:26:48
