FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
사진확대

BIQU 3D Printer Part SKR V1.1 32-Bit with ARM CPU Control Board Open Source Smoothieboard Support TMC2130 TMC2208 Driver 12864 LCD
ASIN번호 B07LBLMDJ4
상품상태 New   
브랜드 BIQU
판매자 BIQU
판매자위치 미확인
현지 판매 가격
$17.99
상품가격 상세보기
관련상품



상품특징
Make sure this fits by entering your model number.ARM-class Cortex-M3 series LPC1768 master chip with 32-bit main frequency 100M,Can be greatly improvedAcceptable 24V input, the hot bed current can be reduced to 1/4 under the same power, effectively solving the heating problem of the hot bed MOS tubeUpgrade the firmware by SD card, which is easy and convenient to operateUse the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliableSupport functions:  Non-trace resumption after power off, run out filament ,and auto shut down
상품설명
product Parameter Microprocessor: ARM Cortex-M3 CPU Input voltage: DC12V-DC24V  5A-15A Motor Driver: Supports TMC2208, TMC2130, LV8729, DRV8825, A4988 Etc., can be externally connected to the motor drive Motor drive interface: X, Y, Z, E0, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions Temperature sensor interface: TH0, TH1, TB, 3 channels 100K NTC (thermal resistance) Display: 2.8 inch TFT, 3.5 inch TFT,LCD12864 PC communication interface: square USB, easy to plug and unplug, communication baud rate 115200 Support file format: G-code Support machine structure: XYZ, delta, kossel, Ultimaker, corexy Recommended software: Cura, Simplify3D, pronterface, Repetier-host, Makerware Packing List: 1*SKR Board 1*cable
































상품특징
Make sure this fits by entering your model number.ARM-class Cortex-M3 series LPC1768 master chip with 32-bit main frequency 100M,Can be greatly improvedAcceptable 24V input, the hot bed current can be reduced to 1/4 under the same power, effectively solving the heating problem of the hot bed MOS tubeUpgrade the firmware by SD card, which is easy and convenient to operateUse the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliableSupport functions:  Non-trace resumption after power off, run out filament ,and auto shut down
상품설명
product Parameter Microprocessor: ARM Cortex-M3 CPU Input voltage: DC12V-DC24V  5A-15A Motor Driver: Supports TMC2208, TMC2130, LV8729, DRV8825, A4988 Etc., can be externally connected to the motor drive Motor drive interface: X, Y, Z, E0, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions Temperature sensor interface: TH0, TH1, TB, 3 channels 100K NTC (thermal resistance) Display: 2.8 inch TFT, 3.5 inch TFT,LCD12864 PC communication interface: square USB, easy to plug and unplug, communication baud rate 115200 Support file format: G-code Support machine structure: XYZ, delta, kossel, Ultimaker, corexy Recommended software: Cura, Simplify3D, pronterface, Repetier-host, Makerware Packing List: 1*SKR Board 1*cable




























2019-04-16 22:47:24