eSUN General Purpose Standard Photopolymer Resin for LCD 3D Printers, UV 405nm 500g Black
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Specifically designed for LCD/LED light source to achieve better printing quality.General Purpose Hard Resin, Compatible to most LCD printers using 405 nm wavelength lightHigh Hardness 88 shore D, Low ShrinkageFaster Printing SpeedLow Odor
상품설명
Color:Black Product: eSUN General Purpose Standard Photopolymer Resin for LCD 3D printers, eResin-LC1004 Size: 500ml Color: Black Packaged in a durable aluminum bottle Resin parameters: Solidify wavelength: 395nm to 405nm Hardness (D): 88D Viscosity (25C,mPa.s): 100 to 150 mPa.s Density: 1.07 to 1.12 g / cm3 Shrinkage of Vol.: 3.72%-4.24% Physical Properties: Flexural strength (Mpa): 59Mpa to 70Mpa Flexural Modulus (Mpa): 1.88 to 2.38 Tensile strength (Mpa): 35Mpa to 42 Mpa Elongation at break (%): 11% to 20% Hardness (D): 88D Precautions: 1. Storage 1) Keep away from light and sealed at room temperature. 2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container. Avoid any dusty or moist environment. 2. Usage: 1) Shake well before use. Avoid any direct sunlight during usage. 2) Keep it away from the children. Do not put in mouth. 3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated. 4) If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary. 5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds. Before choosing eSUN resins for your LCD 3D printers, please confirm that the UV wavelength of your 3D printer is 405nm. Thoroughly tested and perfectly compatible to EPAX X1, Anycubic Photon and Wanhao D7. Bottom Exposure Time: 30-45s when layer thickness is 0.05mm, recommend set to 40s. Bottom Exposure Layers: 4 layers Normal Exposure Time: 8-10s when layer thickness is 0.05mm, recommend set to 9s. PS；Exposure time is proportional to layer thickness. The numbers above are for layer thickness 0.05mm。 Black color requires more exposure time than other light colors.
Make sure this fits by entering your model number.Specifically designed for LCD/LED light source to achieve better printing quality.General Purpose Hard Resin, Compatible to most LCD printers using 405 nm wavelength lightHigh Hardness 88 shore D, Low ShrinkageFaster Printing SpeedLow Odor
상품설명
Color:Black Product: eSUN General Purpose Standard Photopolymer Resin for LCD 3D printers, eResin-LC1004 Size: 500ml Color: Black Packaged in a durable aluminum bottle Resin parameters: Solidify wavelength: 395nm to 405nm Hardness (D): 88D Viscosity (25C,mPa.s): 100 to 150 mPa.s Density: 1.07 to 1.12 g / cm3 Shrinkage of Vol.: 3.72%-4.24% Physical Properties: Flexural strength (Mpa): 59Mpa to 70Mpa Flexural Modulus (Mpa): 1.88 to 2.38 Tensile strength (Mpa): 35Mpa to 42 Mpa Elongation at break (%): 11% to 20% Hardness (D): 88D Precautions: 1. Storage 1) Keep away from light and sealed at room temperature. 2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container. Avoid any dusty or moist environment. 2. Usage: 1) Shake well before use. Avoid any direct sunlight during usage. 2) Keep it away from the children. Do not put in mouth. 3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated. 4) If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary. 5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds. Before choosing eSUN resins for your LCD 3D printers, please confirm that the UV wavelength of your 3D printer is 405nm. Thoroughly tested and perfectly compatible to EPAX X1, Anycubic Photon and Wanhao D7. Bottom Exposure Time: 30-45s when layer thickness is 0.05mm, recommend set to 40s. Bottom Exposure Layers: 4 layers Normal Exposure Time: 8-10s when layer thickness is 0.05mm, recommend set to 9s. PS；Exposure time is proportional to layer thickness. The numbers above are for layer thickness 0.05mm。 Black color requires more exposure time than other light colors.
2020-04-21 17:29:26
