Pen Barrel Mill Trimmer and Cleaner Set with 3/4 inch Cutting Head, 7mm, 8mm, 3/8 inch, 10mm Pilot Cutter Shafts, 0 Size Adaptor Sleeve and Hex Key Wrench.
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
If you love to turn pens or are considering taking pen turning up as a hobby, then this kit is a must for your pen blank preparation process. Typically after you have glued the brass tubes into your pen blanks and the tube is completely dry, it is common practice to clean up, square and trim the ends of the blanks.This is done so that the blank is flat on both ends and to make sure the brass tube meets with the bushings in a clean true manner.This kit provides you with an added bonus as the pilot cutter shaft cleans out any left over glue that may have been left behind during the glue up process. This pen barrel trimmer kit can be used on a drill press, with a hand drill or with your own shop made handle if so desired.When using a hand drill or drill press, it is recommended that you use a pen centering vise (not included) to help secure the pen blank. It also helps to use a pen centering vise for better accuracy when drilling with the Pen Barrel Trimmer.If you are using a hand drill, we recommend securing the blank into a workbench vise if a pen centering vise is not available to you. The kit includes a 3/4 inch cutting Head, 7mm, 8mm, 3/8 inch, 10mm Pilot Cutter Shaft, 0 Size Adaptor Sleeve and a Hex Key Wrench for the cutting head.
If you love to turn pens or are considering taking pen turning up as a hobby, then this kit is a must for your pen blank preparation process. Typically after you have glued the brass tubes into your pen blanks and the tube is completely dry, it is common practice to clean up, square and trim the ends of the blanks.This is done so that the blank is flat on both ends and to make sure the brass tube meets with the bushings in a clean true manner.This kit provides you with an added bonus as the pilot cutter shaft cleans out any left over glue that may have been left behind during the glue up process. This pen barrel trimmer kit can be used on a drill press, with a hand drill or with your own shop made handle if so desired.When using a hand drill or drill press, it is recommended that you use a pen centering vise (not included) to help secure the pen blank. It also helps to use a pen centering vise for better accuracy when drilling with the Pen Barrel Trimmer.If you are using a hand drill, we recommend securing the blank into a workbench vise if a pen centering vise is not available to you. The kit includes a 3/4 inch cutting Head, 7mm, 8mm, 3/8 inch, 10mm Pilot Cutter Shaft, 0 Size Adaptor Sleeve and a Hex Key Wrench for the cutting head.
2019-03-26 06:05:40
