uxcell 688-2RS Deep Groove Ball Bearing 8x16x5mm Double Sealed Chrome Steel Bearings 10-Pack
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.688-2RS (I.D.=8mm, O.D.=16mm, Thickness=5mm)688-2rs bearings are sealed on BOTH SIDES to keep lubricant inChromium Steel long-life bearings, smooth and low noiseABEC Tolerance 1 (P0), Z6 Noise Level for most general useStatic load rating of 5100 newtons and dynamic load rating of 2380 newtons
상품설명
Size:8mmx16mmx5mm NOTE: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description: Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selection Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced NBR (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification: Model: 688-2RS Sealed Type: Double Sealed Inner Race/Outer Race Meterial: Chrome Steel (GCr15) Cage Material: Stamping Steel Inner Diameter (d): 8mm Outer Diameter (D): 16mm Thickness (B): 5mm Dynamic Load Rating (Cr): 1.252kN Static Load Rating (Cor): 0.592kN Accuracy Class: P0 (ABEC-1) Noise Level: Z1 Number of Pack: 10 Pcs
Make sure this fits by entering your model number.688-2RS (I.D.=8mm, O.D.=16mm, Thickness=5mm)688-2rs bearings are sealed on BOTH SIDES to keep lubricant inChromium Steel long-life bearings, smooth and low noiseABEC Tolerance 1 (P0), Z6 Noise Level for most general useStatic load rating of 5100 newtons and dynamic load rating of 2380 newtons
상품설명
Size:8mmx16mmx5mm NOTE: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description: Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selection Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced NBR (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification: Model: 688-2RS Sealed Type: Double Sealed Inner Race/Outer Race Meterial: Chrome Steel (GCr15) Cage Material: Stamping Steel Inner Diameter (d): 8mm Outer Diameter (D): 16mm Thickness (B): 5mm Dynamic Load Rating (Cr): 1.252kN Static Load Rating (Cor): 0.592kN Accuracy Class: P0 (ABEC-1) Noise Level: Z1 Number of Pack: 10 Pcs
2019-12-25 02:10:15