OXlasers 2.5W 3W 5W 7W 450nm Focusable Blue Laser Module for DIY Laser Engraver Laser Head with PWM (2.5W)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Frequency: <15khz, PWM/TTL: 0-5V , Please add a fan when engraving or cutting, in case smoke damage its lens.2.5W 3.5W and 5.5W ARE ALL FOCUSABLEWhen you connect laser to your controller board, please pay attention to the pin positions of 12v+ GND- and PWM/TTL, red wire=12V+, black wire=GND-. Yello wire=PWM+, white wire=PWM-(3-4pin wire). So Red Wire must be connected to the 12v+ pin on your controller board’s interface, Black Wire Must be connected to the GND- pin and Yellow Wire must be connected to the PWM/TTL pin, if you use 3-4pin wire, White wire should be connected to the PWM- pin.if your controller board’s laser interface pins are in different position, please change the wires position to make it match the positions of + - PWM of your interface. If the wires connected wrong, it will damage the diode and the driver board.size: 33*70mm, Wavelength: 450nm,
상품설명
Size:2.5W Technical Parameters: Laser wavelength: 445nm-450nm blue laser Spot type: dotted (adjustable) Output power: 2.5W, 3.5W, 5.5W Size: 2.5W(33*70mm) , 3.5W(33*70mm) 5.5W(40*70mm) 7W(40*70mm) Drive mode: external ACC constant current drive Cooling method: forced air cooling Operating voltage: 12V DC Control interface: 3PIN (PWM, 12V+, GND-) Shell material: aluminum, surface anodized Collimator lens: optical glass coating PACKING LIST: LASER*1 3PIN CABLE*1 3PIN TO 4PIN CABLE*1 SAFETY GLASSES*1
Make sure this fits by entering your model number.Frequency: <15khz, PWM/TTL: 0-5V , Please add a fan when engraving or cutting, in case smoke damage its lens.2.5W 3.5W and 5.5W ARE ALL FOCUSABLEWhen you connect laser to your controller board, please pay attention to the pin positions of 12v+ GND- and PWM/TTL, red wire=12V+, black wire=GND-. Yello wire=PWM+, white wire=PWM-(3-4pin wire). So Red Wire must be connected to the 12v+ pin on your controller board’s interface, Black Wire Must be connected to the GND- pin and Yellow Wire must be connected to the PWM/TTL pin, if you use 3-4pin wire, White wire should be connected to the PWM- pin.if your controller board’s laser interface pins are in different position, please change the wires position to make it match the positions of + - PWM of your interface. If the wires connected wrong, it will damage the diode and the driver board.size: 33*70mm, Wavelength: 450nm,
상품설명
Size:2.5W Technical Parameters: Laser wavelength: 445nm-450nm blue laser Spot type: dotted (adjustable) Output power: 2.5W, 3.5W, 5.5W Size: 2.5W(33*70mm) , 3.5W(33*70mm) 5.5W(40*70mm) 7W(40*70mm) Drive mode: external ACC constant current drive Cooling method: forced air cooling Operating voltage: 12V DC Control interface: 3PIN (PWM, 12V+, GND-) Shell material: aluminum, surface anodized Collimator lens: optical glass coating PACKING LIST: LASER*1 3PIN CABLE*1 3PIN TO 4PIN CABLE*1 SAFETY GLASSES*1
2019-11-30 08:03:41