Tilta Nucleus-Nano Wireless Lens/Focus Control System to Wirelessly Control The Focus of Most DSLR, Mirrorless, or Cine-Style Lenses on Cage, Gimbal Such As Ronin S
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the Nano Motor and Nano Hand Wheel Controller to the same channel and you will have full control. The wireless range of both the Nano Hand Wheel Controller and Nano Motor is 300 feet!The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65Nm and at 14.8V is 1Nm.The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor’s power to be drawn from the G2X tilt motor’s 5V Micro USB output or via a P-tap to 5V Micro USB cable (sold separately).The Nano Motor is also able to connect to the Nucleus-M’s FIZ hand unit and hand grips, allowing for a variety of ways to control the motor as you see fit.
상품설명
Model: WLCT04 It makes it possible for a single operator to control a lens gear while simultaneously operating their gimbal. The Nano system is compatible with all DSLR, mirrorless, and modified “cine-style” vintage photo lenses. The Nano Hand Wheel Controller has a compact knob design similar to professional follow focus hand units (the design is very similar to the Tilta Nucleus-M hand unit’s focus wheel). The Nano Hand Wheel Controller has no delay. It is highly responsive, wireless, and accurate. It is powered via a single 14500 rechargeable battery (which is included in the kit) and yields a 6 hour operating time. Lastly, the Nano system can provide record Run/Stop functionality for numerous camera systems. Please note: The R/S cables we offer for our wooden handles ARE NOT compatible with the Nucleus-Nano since the engineering and pin configurations are completely different. Using the wooden handle R/S cables are not safe to use with the Nucleus-M or Nucleus-Nano. Only use cables that have been developed by us exclusively for the Nucleus-Nano system. Please note: The motor is powered by a battery with a power cable WLC-T04-PC-PTAP or by power box 18650, which are not included in the packing list. Package content : 1.(1) Nucleus-Nano Hand Wheel Controller 2.(1) Nucleus-Nano Wireless Follow Focus Motor 3.(1) 15mm Single Rod Mounting Baseplate For 95mm Lens 4.(2) 1/4″-20 Hex Screws 5.(2) Rod Mount Hex Screw 6.(1) 15mm x 100mm Black Aluminum Rod 7.(1) 31cm 5V Micro USB male to 5V Micro USB male motor power cable 8.(1) 12V / 2A Ronin-S to 5V Micro USB male motor power cable 9.(2) Photographic lens follow focus gear rings 10.(1) Nucleus-Nano Hand Wheel Attachment Plate for Ronin-S/G2x 11.(1) Nucleus-Nano Hand Wheel Attachment Adapter for Zhiyun Crane 1 12.(1) 14500 Battery Charger 13.(2) 14500 Batteries 14.(1) M4 Allen key 15.(1) M6 Allen key 16. (1) Soft Case 17.(1) Manual
The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the Nano Motor and Nano Hand Wheel Controller to the same channel and you will have full control. The wireless range of both the Nano Hand Wheel Controller and Nano Motor is 300 feet!The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise and high torque. It can perform super fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility and compatibility with a wide range of camera rigs and professional mounting solutions.The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus and infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65Nm and at 14.8V is 1Nm.The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor’s power to be drawn from the G2X tilt motor’s 5V Micro USB output or via a P-tap to 5V Micro USB cable (sold separately).The Nano Motor is also able to connect to the Nucleus-M’s FIZ hand unit and hand grips, allowing for a variety of ways to control the motor as you see fit.
상품설명
Model: WLCT04 It makes it possible for a single operator to control a lens gear while simultaneously operating their gimbal. The Nano system is compatible with all DSLR, mirrorless, and modified “cine-style” vintage photo lenses. The Nano Hand Wheel Controller has a compact knob design similar to professional follow focus hand units (the design is very similar to the Tilta Nucleus-M hand unit’s focus wheel). The Nano Hand Wheel Controller has no delay. It is highly responsive, wireless, and accurate. It is powered via a single 14500 rechargeable battery (which is included in the kit) and yields a 6 hour operating time. Lastly, the Nano system can provide record Run/Stop functionality for numerous camera systems. Please note: The R/S cables we offer for our wooden handles ARE NOT compatible with the Nucleus-Nano since the engineering and pin configurations are completely different. Using the wooden handle R/S cables are not safe to use with the Nucleus-M or Nucleus-Nano. Only use cables that have been developed by us exclusively for the Nucleus-Nano system. Please note: The motor is powered by a battery with a power cable WLC-T04-PC-PTAP or by power box 18650, which are not included in the packing list. Package content : 1.(1) Nucleus-Nano Hand Wheel Controller 2.(1) Nucleus-Nano Wireless Follow Focus Motor 3.(1) 15mm Single Rod Mounting Baseplate For 95mm Lens 4.(2) 1/4″-20 Hex Screws 5.(2) Rod Mount Hex Screw 6.(1) 15mm x 100mm Black Aluminum Rod 7.(1) 31cm 5V Micro USB male to 5V Micro USB male motor power cable 8.(1) 12V / 2A Ronin-S to 5V Micro USB male motor power cable 9.(2) Photographic lens follow focus gear rings 10.(1) Nucleus-Nano Hand Wheel Attachment Plate for Ronin-S/G2x 11.(1) Nucleus-Nano Hand Wheel Attachment Adapter for Zhiyun Crane 1 12.(1) 14500 Battery Charger 13.(2) 14500 Batteries 14.(1) M4 Allen key 15.(1) M6 Allen key 16. (1) Soft Case 17.(1) Manual
2019-08-08 13:31:29
