Modified Special Rearview Mirror Cover Cap Decoration (Carbon Fiber Decorative Bright Strip )
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.[Easy to install] Easy to install, firm and not easy to fall off. If you need a mirror cover, this is the perfect choice![Quality Materials] This pair of mirror masks are made of high-quality plastic material to ensure maximum strength and durability for long-lasting use. You need such a practical tool.It is used for exterior decoration.[Compatibility] Applicable to the 7th generation Volkswagen Golf. As a pair, it is the best alternative to the old mirror cover.[Protection mirror] 100% new mirror cover to protect the mirror from damage.
상품설명
Product parameters: Product Name: Suitable for golf 7 modification special Rearview mirror cover decoration Carbon fiber decorative bright strip Applicable models: Ten generations of Civic Product material: ABS plating Product use: exterior decoration decoration Product specifications: special car Product color: carbon fiber pattern Installation effect: the original car version of the car dedicated to the original car installation parts 100% seamlessly fit! Installation method: Paste (3M glue on the back. The temperature should be below 15 degrees and must be heated and pasted!) Installation Notes: 1. Surface cleaning. The surface should be kept absolutely clean and dry. Generally, the fabric can be scrubbed with 50% alcohol, isopropanol, acetone or toluene. The solvent-cleaned surface must be thoroughly filtered. Can be pasted. 2. The product is pasted. Before the product is pasted, the product should be placed in the required installation. After confirming the position of the product, remove the red film and paste it. Avoid contact between the finger and the rubber surface after the product is pasted. Must be pressed hard to ensure sufficient contact and wetting of the rubber surface. 3. After the product and parts are pasted, it is necessary to contact the water and the large dust within 24 hours to achieve the best adhesion. Please choose to install on sunny days. Always clean the paste position with detergent before installation and press it for a while. Do not wash your car within 2 days. If it is colder weather, please use a hair dryer to bake slightly to maintain the softness and viscosity of the gel.
Make sure this fits by entering your model number.[Easy to install] Easy to install, firm and not easy to fall off. If you need a mirror cover, this is the perfect choice![Quality Materials] This pair of mirror masks are made of high-quality plastic material to ensure maximum strength and durability for long-lasting use. You need such a practical tool.It is used for exterior decoration.[Compatibility] Applicable to the 7th generation Volkswagen Golf. As a pair, it is the best alternative to the old mirror cover.[Protection mirror] 100% new mirror cover to protect the mirror from damage.
상품설명
Product parameters: Product Name: Suitable for golf 7 modification special Rearview mirror cover decoration Carbon fiber decorative bright strip Applicable models: Ten generations of Civic Product material: ABS plating Product use: exterior decoration decoration Product specifications: special car Product color: carbon fiber pattern Installation effect: the original car version of the car dedicated to the original car installation parts 100% seamlessly fit! Installation method: Paste (3M glue on the back. The temperature should be below 15 degrees and must be heated and pasted!) Installation Notes: 1. Surface cleaning. The surface should be kept absolutely clean and dry. Generally, the fabric can be scrubbed with 50% alcohol, isopropanol, acetone or toluene. The solvent-cleaned surface must be thoroughly filtered. Can be pasted. 2. The product is pasted. Before the product is pasted, the product should be placed in the required installation. After confirming the position of the product, remove the red film and paste it. Avoid contact between the finger and the rubber surface after the product is pasted. Must be pressed hard to ensure sufficient contact and wetting of the rubber surface. 3. After the product and parts are pasted, it is necessary to contact the water and the large dust within 24 hours to achieve the best adhesion. Please choose to install on sunny days. Always clean the paste position with detergent before installation and press it for a while. Do not wash your car within 2 days. If it is colder weather, please use a hair dryer to bake slightly to maintain the softness and viscosity of the gel.
2019-03-29 00:01:03