KeeYees Professional 3D Printer CNC Kit with Tutorial, CNC Shield V3 + Stepper Motor Driver + Nema 17 Stepper Motor + Mechanical Switch Endstop
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.【CNC Expansion Board with Free 20pcs Jumpers】This is the latest version of the expansion board, which can be used for engraving machines and 3D printers. It can drive 4 A4988/DRV8825 stepper motors. The jumper caps are necessary for CNC setups. You do not need to purchase this part extra.【DRV8825 Stepper Motor Driver w/ Heat Sink】DRV8825 is upgrade of A4988! It is a must-have module for 3D printers, CNCs and engraving machines. The 4-layer PCB board has better heat dissipation performance. 【Mechanical Switch Endstop】It uses a 22AWG wire that can withstand a current of 2A and a voltage of 300V. Better quality than traditional copper wire. It can reach the insulation temperature of 80℃. It is not easy to break, and very convenient to plug and remove.【Reliable technical support】If you don't have a CD drive, please visit our website( www.keeyees.com ) to get relevant information or can contact us on Amazon, we will send PDF Document to you.
상품설명
CNC Expansion Board: -GRBL 0.9 compatible -Runs on 12-36V DC -4-Axis support: X, Y, Z -It can drive 4 stepper motors, and each stepper motor only needs 2 IO ports. That is to say, 6 IO ports can manage 3 stepper motors very well, which is very convenient to use. DRV8825 Stepper Motor Driver: -Applied for driving stepper motors up to 8.2V-45V 2.5A -4-layer PCB board (better heat dissipation) -6 different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Mechanical Switch Endstop: -Length of Cable: 70 cm -Red line --- VCC (ramps of +) -Black wire --- GND (ramps of -) -Green Line --- SIGNAL (ramps in s) Package Contents: 1 x CNC Shield Board 1 x KeeYees Board 4 x DRV8825 Stepper Motor Driver with Heat Sink 4 x RAMPS Mechanical Switch Endshop 20 x 2.54mm Black Jumper Caps 1 x 1.5m USB cable
Make sure this fits by entering your model number.【CNC Expansion Board with Free 20pcs Jumpers】This is the latest version of the expansion board, which can be used for engraving machines and 3D printers. It can drive 4 A4988/DRV8825 stepper motors. The jumper caps are necessary for CNC setups. You do not need to purchase this part extra.【DRV8825 Stepper Motor Driver w/ Heat Sink】DRV8825 is upgrade of A4988! It is a must-have module for 3D printers, CNCs and engraving machines. The 4-layer PCB board has better heat dissipation performance. 【Mechanical Switch Endstop】It uses a 22AWG wire that can withstand a current of 2A and a voltage of 300V. Better quality than traditional copper wire. It can reach the insulation temperature of 80℃. It is not easy to break, and very convenient to plug and remove.【Reliable technical support】If you don't have a CD drive, please visit our website( www.keeyees.com ) to get relevant information or can contact us on Amazon, we will send PDF Document to you.
상품설명
CNC Expansion Board: -GRBL 0.9 compatible -Runs on 12-36V DC -4-Axis support: X, Y, Z -It can drive 4 stepper motors, and each stepper motor only needs 2 IO ports. That is to say, 6 IO ports can manage 3 stepper motors very well, which is very convenient to use. DRV8825 Stepper Motor Driver: -Applied for driving stepper motors up to 8.2V-45V 2.5A -4-layer PCB board (better heat dissipation) -6 different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Mechanical Switch Endstop: -Length of Cable: 70 cm -Red line --- VCC (ramps of +) -Black wire --- GND (ramps of -) -Green Line --- SIGNAL (ramps in s) Package Contents: 1 x CNC Shield Board 1 x KeeYees Board 4 x DRV8825 Stepper Motor Driver with Heat Sink 4 x RAMPS Mechanical Switch Endshop 20 x 2.54mm Black Jumper Caps 1 x 1.5m USB cable
2020-06-25 22:03:01
