ILIFE Shinebot W400 Floor Washing Scrubbing Robot for Hard Floor, Dual 0.9L Water Tank
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.The All-New TidalPower Cleaning System with patented technology: sprays the hard floor with clean water to soften stains, scrubs the hard floor with a microfiber roller, removes dirty water with superior suction power and wipes off residues with a rubber scraper, leaving the hard floors spotless. Please fill water tank according to the instruction and press “CLEAN”Separated compartments for clean and dirty water: one 0.85L water tank to spray clean water and one 0.9L water tank to collect dirty water. This greatly improves the cleaning efficiency and properly collects the dirty water for easy disposal.Tackles and removes thick household stains on all kinds of hard floors, including sauces, paint and footprints.Choose Path Mode with a full water tank to work 30-40 minutes covering around 400 sq ft. Area Mode will clean a specific area (around 270 sq.ft) in front of the robot along a systematic path. Use Spot Mode for a deep cleaning with increased suction in a 0.8m x 0.8m area, suitable for concentrated or thick stains. Edge Mode can be used to clean along the edges of walls and corners.After the Shinebot washing is complete, there will be a small amount of water on the floor when you lift the robot. Roller and Scraper Blade must be installed before each cleaning, approximate time 10 seconds. A manual recharge will be required when the Shinebot’s battery is fully exhausted since an automatic docking of a washing/scrubbing robot would be a hazard.Any questions, call 1-800-631-9676 for a full time customer service from Monday to Friday at 9:00 A.M-5:00 P.M CST.
Make sure this fits by entering your model number.The All-New TidalPower Cleaning System with patented technology: sprays the hard floor with clean water to soften stains, scrubs the hard floor with a microfiber roller, removes dirty water with superior suction power and wipes off residues with a rubber scraper, leaving the hard floors spotless. Please fill water tank according to the instruction and press “CLEAN”Separated compartments for clean and dirty water: one 0.85L water tank to spray clean water and one 0.9L water tank to collect dirty water. This greatly improves the cleaning efficiency and properly collects the dirty water for easy disposal.Tackles and removes thick household stains on all kinds of hard floors, including sauces, paint and footprints.Choose Path Mode with a full water tank to work 30-40 minutes covering around 400 sq ft. Area Mode will clean a specific area (around 270 sq.ft) in front of the robot along a systematic path. Use Spot Mode for a deep cleaning with increased suction in a 0.8m x 0.8m area, suitable for concentrated or thick stains. Edge Mode can be used to clean along the edges of walls and corners.After the Shinebot washing is complete, there will be a small amount of water on the floor when you lift the robot. Roller and Scraper Blade must be installed before each cleaning, approximate time 10 seconds. A manual recharge will be required when the Shinebot’s battery is fully exhausted since an automatic docking of a washing/scrubbing robot would be a hazard.Any questions, call 1-800-631-9676 for a full time customer service from Monday to Friday at 9:00 A.M-5:00 P.M CST.
2019-11-09 18:00:18
