Tuningsworld Adjustable Front Lower Control Arms for Jeep Wrangler TJ 1997-2006 for Cherokee XJ MJ 1986-2001 for Grand Cherokee ZJ 1993-1998 for Grand Cherokee WJ 1999-2004 with 0''-8'' Lift
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.【Application】Fit for Grand Cherokee ZJ 1993-1998, for Grand Cherokee WJ (Front Only) 1999-2004; Fit for Jeep Wrangler TJ 1997-2006, for Cherokee XJ MJ 1986-2001;【Length Adjustable Range】MIN 385MM /15.2\'\', MAX 455MM / 17.9\'\' ; Lift Height: 0\'\'-4”Lift【Feature】Polyurethane bushing is installed on the control arms; Tough and durable, which is made in machined steel alloy and finished with industrial powder coating.【Package Contents】2 Pieces of Front Lower Adjustable Control Arms【Note】These control arms twist or rotate while driving allowing the axle to flex easily over obstacles offroad. These lower control arms fix the caster angle so the front axles move in correct manner when encountering bumps on the road, and are perfect for 3 inches of lift. For that amount of lift, you won\'t need upper control arms.
상품설명
Applications: for Jeep Wrangler TJ 1997-2006 for Cherokee XJ MJ 1986-2001 for Grand Cherokee ZJ 1993-1998 for Grand Cherokee WJ (Front Only) 1999-2004 Color: Gold Package Contents: 2x Front Lower Adjustable Control Arms Length Adjustabe Range: MIN 38.5cm ( about15.2\'\')- MAX 45.5cm ( about 17.9\'\') Dimensions: Bushing Diameter: 60mm/2.36" Hole Diameter: 16mm/0.63" Advantages: Variable length suspension arm is easily adjusted for proper positioning of axle housing and pinion angle These upgrades drastically extend the longevity of the joints themselves since they are completely rebuildable for easy maintenance and adjustments They have fine thread adjustments and are good for lifts up to 8 inches. adjusting the length is as simple as removing one end and rotating the body or shaft to the desired length These lower control arms fix the caster angle so the front axles move in correct manner when encountering bumps on the road, and are perfect for 3 inches of lift. For that amount of lift, you won\'t need upper control arms. Features: * This Front Lower Adjustable Control Arm set can be added to any lift kit ranging from stock height to a full 4 inches of lift * Made by high strength steel and durable powder-coated finish * Improved suspension geometry to reduce bump steer * Improves front suspension, handling, predictable response and even prevents premature tire wearing * Design for street, track or drift racing precise adjustments with long service life; Perfect for a wide variety for motorsport applications * Perfect for track cars, drift control, street course, off road * Direct bolt-on for oe factory or replacement * This controlarm is very capable off road
Make sure this fits by entering your model number.【Application】Fit for Grand Cherokee ZJ 1993-1998, for Grand Cherokee WJ (Front Only) 1999-2004; Fit for Jeep Wrangler TJ 1997-2006, for Cherokee XJ MJ 1986-2001;【Length Adjustable Range】MIN 385MM /15.2\'\', MAX 455MM / 17.9\'\' ; Lift Height: 0\'\'-4”Lift【Feature】Polyurethane bushing is installed on the control arms; Tough and durable, which is made in machined steel alloy and finished with industrial powder coating.【Package Contents】2 Pieces of Front Lower Adjustable Control Arms【Note】These control arms twist or rotate while driving allowing the axle to flex easily over obstacles offroad. These lower control arms fix the caster angle so the front axles move in correct manner when encountering bumps on the road, and are perfect for 3 inches of lift. For that amount of lift, you won\'t need upper control arms.
상품설명
Applications: for Jeep Wrangler TJ 1997-2006 for Cherokee XJ MJ 1986-2001 for Grand Cherokee ZJ 1993-1998 for Grand Cherokee WJ (Front Only) 1999-2004 Color: Gold Package Contents: 2x Front Lower Adjustable Control Arms Length Adjustabe Range: MIN 38.5cm ( about15.2\'\')- MAX 45.5cm ( about 17.9\'\') Dimensions: Bushing Diameter: 60mm/2.36" Hole Diameter: 16mm/0.63" Advantages: Variable length suspension arm is easily adjusted for proper positioning of axle housing and pinion angle These upgrades drastically extend the longevity of the joints themselves since they are completely rebuildable for easy maintenance and adjustments They have fine thread adjustments and are good for lifts up to 8 inches. adjusting the length is as simple as removing one end and rotating the body or shaft to the desired length These lower control arms fix the caster angle so the front axles move in correct manner when encountering bumps on the road, and are perfect for 3 inches of lift. For that amount of lift, you won\'t need upper control arms. Features: * This Front Lower Adjustable Control Arm set can be added to any lift kit ranging from stock height to a full 4 inches of lift * Made by high strength steel and durable powder-coated finish * Improved suspension geometry to reduce bump steer * Improves front suspension, handling, predictable response and even prevents premature tire wearing * Design for street, track or drift racing precise adjustments with long service life; Perfect for a wide variety for motorsport applications * Perfect for track cars, drift control, street course, off road * Direct bolt-on for oe factory or replacement * This controlarm is very capable off road
2022-05-29 08:52:20