Steve Meade Designs SMD CC-1 Crossover Calibrator
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
The Crossover Calibrator’s circuitry is digital microprocessor controlledCrossover -3dB point accuracy +/- 0.25dBLow Battery LED trigger battery voltage < 6.5VdcAuto-shut off timer 8 - 10 minutes after ON button is pressed
상품설명
The purpose and benefit of the D’Amore Engineering / SMD Crossover Calibrator. Most modern car audio amplifiers have a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to (sometimes) 500hz. The purpose of this tool is to enable the installer to set the crossover frequency of an electronic crossover to the desired frequency, accurately and quickly. Enter "Competition Mode" and easily match gains on any 4-channel amplifier or even multiple bass amplifiers. This is VERY important when using subwoofers that share a common chamber, especially if you have 2 (or more) amplifiers on a dual voice coil driver.
The Crossover Calibrator’s circuitry is digital microprocessor controlledCrossover -3dB point accuracy +/- 0.25dBLow Battery LED trigger battery voltage < 6.5VdcAuto-shut off timer 8 - 10 minutes after ON button is pressed
상품설명
The purpose and benefit of the D’Amore Engineering / SMD Crossover Calibrator. Most modern car audio amplifiers have a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to (sometimes) 500hz. The purpose of this tool is to enable the installer to set the crossover frequency of an electronic crossover to the desired frequency, accurately and quickly. Enter "Competition Mode" and easily match gains on any 4-channel amplifier or even multiple bass amplifiers. This is VERY important when using subwoofers that share a common chamber, especially if you have 2 (or more) amplifiers on a dual voice coil driver.
2019-05-24 16:26:16
