DBHAWK Motorcycle LED Decoder 4PCS 50W 12 ohm 12RJ LED Load Resistor Decoder Fix Hyper Flash Turn Signal Lights Easy to Installation
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Easy Installation with 15cm wire at each end of the resistor and T-Taps. Just connect the wires with the Splice taps provided. No wire cutting is necessary.Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb; Solution for fast turn signal blinking response after installing SMD LED light bulbBeautiful golden aluminum housing, excellent heat dissipation; Solve some electronic issues coursed by changing stock bulbs to LED onesThese 12 Ohm, 50 Watt resistors can be connected across the turn signal bulbs to simulate the load of a regular filament bulb. And each LED bulb installation requires one resistor connected in parellel.We will give you 100% satisfaction, so you can buy and use with confidence. If you have any question, please feel free to contact us.
상품설명
Specifications: Polarity: None Power: Max 50W (12W when installed in a 12V Circuit) Voltage: 12V-24V Resistance: 12 ohm Weight:124g Dimensions: Approx. 5 x 2.2 x 1.7 cm (1.97 x 0.9 x 0.6 inch) Material: aluminumNotice: These load resister may get really hot. Please mount them on metal surface and not in contact with any plastic parts.Package Content: 4x decoder 8x clips
Easy Installation with 15cm wire at each end of the resistor and T-Taps. Just connect the wires with the Splice taps provided. No wire cutting is necessary.Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb; Solution for fast turn signal blinking response after installing SMD LED light bulbBeautiful golden aluminum housing, excellent heat dissipation; Solve some electronic issues coursed by changing stock bulbs to LED onesThese 12 Ohm, 50 Watt resistors can be connected across the turn signal bulbs to simulate the load of a regular filament bulb. And each LED bulb installation requires one resistor connected in parellel.We will give you 100% satisfaction, so you can buy and use with confidence. If you have any question, please feel free to contact us.
상품설명
Specifications: Polarity: None Power: Max 50W (12W when installed in a 12V Circuit) Voltage: 12V-24V Resistance: 12 ohm Weight:124g Dimensions: Approx. 5 x 2.2 x 1.7 cm (1.97 x 0.9 x 0.6 inch) Material: aluminumNotice: These load resister may get really hot. Please mount them on metal surface and not in contact with any plastic parts.Package Content: 4x decoder 8x clips
2019-04-22 14:23:15
