Low Noise Amplifier - 0.1-2000MHz RF Wideband Amplifier 30dB Low-Noise LNA Broadband Module Receiver
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.100% Brand new and high qualityThis Low Noise Amplifier is suitable for detecting weak signals.With wide frequency range, high gain, low noise figureThis product can be applied to various RF receive front-end and increases communication distanceUsed for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise RF signal amplification
상품설명
Features: 100% Brand new and high quality This Low Noise Amplifier is suitable for detecting weak signals. With wide frequency range, high gain, low noise figure This product can be applied to various RF receive front-end and increases communication distance Used for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise RF signal amplification Specification: Color:green + gold Operating frequency: 0.1-2000MHz Amplifier gain: F=0.1MHz, gain=32dB F=500Mhz, gain=31dB F=1000MHz, gain=29dB F=1500Mhz, gain=25dB F=2000MHz, gain=20dB Maximum power output: +10dBm(10mW) Power supply voltage: 6-12 VDC System impedance: 50Ω Size: 25*52mm/1*2.1in Diameter of end: 5mm Weight: Approx.7g/0.2oz Tips: 1.When working frequency is less than 500 MHZ, it get well gain flatness, can make it less than 1dB after careful adjustment. The lower frequency the higher gain consistency. 2.Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 0.1 uF, working to 0.1 MHz. Increase the input and output capacitance appropriately,can extend the cut-off frequency, such as 10uF capacitance can work to 5KHz. 3.When the power supply voltage changes in 5-8 v, it can be used as a variable gain amplifier, gain increases with the increase of the power supply voltage, which suitable for radio frequency receive front-end circuit, using DA control power supply voltage, to control the gain of the amplifier, automatic gain control 4.When the power supply voltage in the 8-10 v, the low frequency end gain up to 30 db, at this time the amplifier has a low noise coefficient and good stability. 5.When the voltage is 12 v, reach maximum gain, the low frequency end gain of 32.5 dB Package list: 1 x RF Amplifier
Make sure this fits by entering your model number.100% Brand new and high qualityThis Low Noise Amplifier is suitable for detecting weak signals.With wide frequency range, high gain, low noise figureThis product can be applied to various RF receive front-end and increases communication distanceUsed for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise RF signal amplification
상품설명
Features: 100% Brand new and high quality This Low Noise Amplifier is suitable for detecting weak signals. With wide frequency range, high gain, low noise figure This product can be applied to various RF receive front-end and increases communication distance Used for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise RF signal amplification Specification: Color:green + gold Operating frequency: 0.1-2000MHz Amplifier gain: F=0.1MHz, gain=32dB F=500Mhz, gain=31dB F=1000MHz, gain=29dB F=1500Mhz, gain=25dB F=2000MHz, gain=20dB Maximum power output: +10dBm(10mW) Power supply voltage: 6-12 VDC System impedance: 50Ω Size: 25*52mm/1*2.1in Diameter of end: 5mm Weight: Approx.7g/0.2oz Tips: 1.When working frequency is less than 500 MHZ, it get well gain flatness, can make it less than 1dB after careful adjustment. The lower frequency the higher gain consistency. 2.Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 0.1 uF, working to 0.1 MHz. Increase the input and output capacitance appropriately,can extend the cut-off frequency, such as 10uF capacitance can work to 5KHz. 3.When the power supply voltage changes in 5-8 v, it can be used as a variable gain amplifier, gain increases with the increase of the power supply voltage, which suitable for radio frequency receive front-end circuit, using DA control power supply voltage, to control the gain of the amplifier, automatic gain control 4.When the power supply voltage in the 8-10 v, the low frequency end gain up to 30 db, at this time the amplifier has a low noise coefficient and good stability. 5.When the voltage is 12 v, reach maximum gain, the low frequency end gain of 32.5 dB Package list: 1 x RF Amplifier
2019-03-31 06:01:01